When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is everyone doing running the racecraft brackets with the kirkey 55 series seat to get there seat to sit lower and not hit the top bar of the rollcage as sean in this pic of my setup
i have to lean my head to the side when wearing my helmet. any tips would be awsome. thanks guys
Put your helmet on after you’re sitting in the car?
well that's the problem when i have my helmet on a
sitting i have to keep my head tilted sideways. i guess this is there new design for more adjustability but they cant be adjusted anyway that is comfortable 😂😂😂. I would not recommend these brackets to anyone who is running a 8.50 cage... Period.
I cut my racecraft brackets and welded them back up shortening them as much as possible. then I moved the whole seat over 3/4" toward the center console. only way I fit with my helmet. can only fit maybe a 1/4" sheet of cardboard between the bar and my helmet now. if I turn my head i'm still bumping into the bar. problems of a 6ft+ driver in a T-top F-body....
Take the brackets off, use the 2 back studs to mount the seat directly to the floor, couple washers on the studs and get a flat style but so they don’t dig into your ***.
support the back of the seat on the cage properly and go man go.
06-25-2019, 08:06 PM
kirkey seat /racecraft bracket w/rollcage 
