Calypso Fox Street car Quest for 6's Hydraulic 388ci GTR98
The following 3 users liked this post by BlackSS4thgen:
#209
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Love. This. Car
The following users liked this post:
biketopia (06-24-2020)
The following users liked this post:
C5_Pete (07-26-2020)
#214
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its been a very strange and hectic summer. I keep having goofy ignition issues periodically. Put it on the dyno and rocked out. Took it to the track. Laying over.
Good news is I have it making some major jam. 40 pounds of boost. its fast. Bad news is I havent completed anything yet lol.
Blew charge pipe on the dyno. Bent cooler bracket a tad. Made it to 1,600hp at 7,250 rpm pn 40 pounds. Took it off. Went home. Fixed it.
Took it too the track. Fucked up first pass. I stayed in it for some data. One coil auto fired. Blew headgasket and bent a rod.
So FML over here lol. New car pains I guess. I wish the shop wasnt so busy. This year has been absolutely insane! But by the time cooler weather hits Ill have it ready for some stuff to happen!
Good news is I have it making some major jam. 40 pounds of boost. its fast. Bad news is I havent completed anything yet lol.
Blew charge pipe on the dyno. Bent cooler bracket a tad. Made it to 1,600hp at 7,250 rpm pn 40 pounds. Took it off. Went home. Fixed it.
Took it too the track. Fucked up first pass. I stayed in it for some data. One coil auto fired. Blew headgasket and bent a rod.
So FML over here lol. New car pains I guess. I wish the shop wasnt so busy. This year has been absolutely insane! But by the time cooler weather hits Ill have it ready for some stuff to happen!
The following users liked this post:
C5_Pete (07-26-2020)
#218
TECH Veteran
#219
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had one fail the very last pass of the year and I did wire these identically. I am already running these harder so I am going to double the amp's of the relays and double every single wire gauge. Im not sure whats the issue but Ill figure it out.
I had even more weird issues before I even went into boost with coils. Replaced a whole set and it was good ... until it wasnt good.
So now that Im tearing stuff up. It needs resolved.
I had even more weird issues before I even went into boost with coils. Replaced a whole set and it was good ... until it wasnt good.
So now that Im tearing stuff up. It needs resolved.