Calypso Fox Street car Quest for 6's Hydraulic 388ci GTR98
The following users liked this post:
Tuskyz28 (05-17-2020)
#189
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My friend cerakoted the headers and crossover for me.
I wasnt happy having 3 different intake pushrods with all kinds of different pre load. So I called on comp for a perfectly ground cam with only 1 intake length and very close preload.
I wasnt happy having 3 different intake pushrods with all kinds of different pre load. So I called on comp for a perfectly ground cam with only 1 intake length and very close preload.
The following users liked this post:
C5_Pete (06-04-2020)
#192
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
jesussssssssssssssssss. when you think it can't get any better, you go and do it. That color on the hotside is money.
The following users liked this post:
Launch (06-08-2020)
#193
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the new comp had one size and very very close all across the board for pre load.
#194
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I wanted to leave the option to run son gold accented wheels in the future. Also in case I decided to coat the coldside black I didnt want too much black.
The following users liked this post:
Macgyver007 (06-08-2020)
#196
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Surprise. I started it two days ago but It didnt run as well. So its on the final assembly/wiring and down hill slide! Enjoy the video.
#197
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Right? I had my buddy Ben Bradfield out of hamilton michigan do it. Did a great job, did it in a week and charged me $230.
I wanted to leave the option to run son gold accented wheels in the future. Also in case I decided to coat the coldside black I didnt want too much black.
I wanted to leave the option to run son gold accented wheels in the future. Also in case I decided to coat the coldside black I didnt want too much black.
#198
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congratulations Kenny. Its been a couple days. Not trying to be pushy or anything but. Any track results? Your FREAKIN KILLING US. Lol Can't wait to see the video of that missile. Best of Luck to You Man.
#199
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ftw!!
Last edited by Launch; 06-10-2020 at 06:09 PM.
#200
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a pretty extensive list of things to do to this thing first. But Id think Ill be ready in about 3-4 weeks. Im going to go over everything with a fine tooth comb and get it ready for the dyno soon. Put some shake down miles on it since its new top to bottom. Then dyno it to make sure everything is A1. looking promising so far.