9.50 first time out.
#1
9.50 first time out.
Dave's 98 410 CID THD400 with a 250 DP Fogger runs 9.507 @ 139.75. It was his only run tonight and at the 1,000 ft mark started bouncing off the rev limiter all the way to the 1/4, it needs a gear change. We should be ready with the gears before the weekend, stay tuned. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Julio.
Here is the time slip. ---> <img src="http://www.cartek.net/images/dave950.jpg" alt=" - " />
Julio.
Here is the time slip. ---> <img src="http://www.cartek.net/images/dave950.jpg" alt=" - " />
#3
Re: 9.50 first time out.
Killer times, according to your 1/8th mile time you should of run around 9.35. Thats humpin for the first time out. Congrats.
#4
Re: 9.50 first time out.
6 flat @ 114 in the 1/8th!!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
That's flat haulin! Good job, guys! A gear change should help out quite a bit.
That's flat haulin! Good job, guys! A gear change should help out quite a bit.
#6
Re: 9.50 first time out.
*Cartek* to *Houston*...
*Ready for take off*
*Cartek you have clearance*... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Way to go guys!
What gears are in it now? What gears are you putting in?
*Ready for take off*
*Cartek you have clearance*... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Way to go guys!
What gears are in it now? What gears are you putting in?
#7
Re: 9.50 first time out.
Julio, you have a very low 9 in that car. Seems like the car is slowing up top. MPH should be a little higher in the 1/4. Bottle pressure dropping at all?
Nice times! Another LS1 in the nines.
Nice times! Another LS1 in the nines.
Trending Topics
#9
Re: 9.50 first time out.
<img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> HOLY ****! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
-I can say that, its my site <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Congrats Dave and Julio! Awesome intro.
-Tony
-I can say that, its my site <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Congrats Dave and Julio! Awesome intro.
-Tony
#12
Re: 9.50 first time out.
WOW,Not bad for the first time out!!!
Trapping 114 at the 1/8 should be about 144 at the big end w/this setup but N20 MPH is alittle hard to predict sometimes.Should be right around 9.38 once u get the gears worked out.
Have a great holiday guys...
JS
<small>[ November 27, 2002, 10:47 AM: Message edited by: JS ]</small>
Trapping 114 at the 1/8 should be about 144 at the big end w/this setup but N20 MPH is alittle hard to predict sometimes.Should be right around 9.38 once u get the gears worked out.
Have a great holiday guys...
JS
<small>[ November 27, 2002, 10:47 AM: Message edited by: JS ]</small>
#13
Re: 9.50 first time out.
Thanks guys.
It's a cast iron 410, 4.040 bore X 4.000 Stroke. It has a THD-400 with T-brake but since we were thrashing just to get a run that night we didn't get a chance to wire it, we got to ATCO after 8:30 and only had the one run. It should 60' better with the T-brake.
Julio
It's a cast iron 410, 4.040 bore X 4.000 Stroke. It has a THD-400 with T-brake but since we were thrashing just to get a run that night we didn't get a chance to wire it, we got to ATCO after 8:30 and only had the one run. It should 60' better with the T-brake.
Julio
#14
Re: 9.50 first time out.
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" /> <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#17
Re: 9.50 first time out.
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Tekhombre:
<strong>Mike, it has 3.73s on a 28" tire. We are thinking of going to 3.55s but now we are thinking it's the converter. It's supposed to be a 3,400 nitrous converter but it's stalling at 6,000, it should be more like 4,200 with the nitrous on.
Julio</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I'm glad you're looking elsewhere for a problem because 3.73's with a 28" tire should allow quite a high mph(145+). Of course, it depends on the rpm range of the engine.
<strong>Mike, it has 3.73s on a 28" tire. We are thinking of going to 3.55s but now we are thinking it's the converter. It's supposed to be a 3,400 nitrous converter but it's stalling at 6,000, it should be more like 4,200 with the nitrous on.
Julio</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I'm glad you're looking elsewhere for a problem because 3.73's with a 28" tire should allow quite a high mph(145+). Of course, it depends on the rpm range of the engine.
#19
Re: 9.50 first time out.
WOW... <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> JULIO