super lightweight custom kirkey seat bracket...pic within
#1
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Talking](https://ls1tech.com/forums/images/icons/icon10.gif)
Welding buddy of mine finished up my driver side kirkey seat installation last weekend. Used 1/2" chromemoly tubing and the factory seat studs. Also braced to the rear crossbar with 1/2" CM tubing. Total weight was just under 2 lbs for the bracket
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
![](http://home.comcast.net/~bkrzewinski/seat.jpg)
#4
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
its a bit forward of the stock one. Sits ~2.5-3" up IIRC. I have a M6 which requires alot of left foot intervention ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I'm 6'-0"
Tim...2 weeks from today and counting
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I'm 6'-0"
Tim...2 weeks from today and counting
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#5
10 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bri,U know which ones I like better but yours are real nice and light too..
https://ls1tech.com/forums/showthrea...+seat+brackets
Now go get those 10.30's
https://ls1tech.com/forums/showthrea...+seat+brackets
Now go get those 10.30's
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Last edited by JS; 02-19-2005 at 11:59 PM.