LS1TECH - Camaro and Firebird Forum Discussion
RACING DEPARTMENT
Drag Racing Tech
Two Step install on a M6?

Drag Racing Tech

Sponsored by:

Two Step install on a M6?

Reply Subscribe

Search this Thread

Old

Mar 15, 2005 | 06:55 AM

#1

Thread Starter

10 Second Club

iTrader: (5)

Joined: Nov 2003

Posts: 1,649

Likes: 0

From: Ft. Lauderdale, FL

Default

Two Step install on a M6?

Two Step install on a M6?
With switch are you splicing into on the clutch pedal for the activation wire?
The lower one that is primary use as a start switch that insure the clutch pedal is fully depress to allow engine starting or the top switch that is primary for disengaging the cruise control when the clutch pedal is depress a little?
Thanks

Old

Mar 15, 2005 | 09:04 AM

#2

8 Second Club

iTrader: (3)

Joined: Apr 2002

Posts: 1,461

Likes: 1

From: Missouri

Default

top cruise control switch

Old

Mar 15, 2005 | 09:25 AM

#3

Thread Starter

10 Second Club

iTrader: (5)

Joined: Nov 2003

Posts: 1,649

Likes: 0

From: Ft. Lauderdale, FL

Default

Thanks that is what I thought

Old

Mar 15, 2005 | 12:03 PM

#4

LS1TECH Sponsor

iTrader: (33)

Joined: Jul 2002

Posts: 4,399

Likes: 0

From: Out on the farm in Central IL

Default

White wire to the trunk release and the grey wire to pn 32 on the blue connector of the PCM. This pin is the clutch pedal wire.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 12:24 AM.