Wolfe Anti-Roll Bar Install Question
Thread Starter
On The Tree
Joined: Jul 2002
Posts: 179
Likes: 1
From: Choctaw, OK
Originally Posted by Dan / Wolfe Race Craft
No, the torque are remains. The sway bar and Torque arm do different jobs. Our sway bar does not eliminate any of the suspension components.
Dave
TECH Regular
Joined: Nov 2001
Posts: 417
Likes: 0
From: Anderson, SC
http://community.webshots.com/photo/...13997090mOgvZy
Here's a pic of where I welded mine. Didn't have a better pic. Hope this helps Dave...
Here's a pic of where I welded mine. Didn't have a better pic. Hope this helps Dave...
I have a question as well. I had my father weld up mine this afternoon and when I came back, its centered, but the tabs on the mounts are not sitting on the shock brackets, they're about an inch away from them and the bar sits real close to the housing. Its kinda late now to undo it without a lot of cutting and grinding, but will this have any negative affect?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Will have no effect, as long at it is welded square on the rearend. The tabs are there for a alinment. Seems some rearend are built different so the tabs don't always touch the shock bracket as originally designed.
I wouldn't worry about it.
I wouldn't worry about it.
