lightweight carpet
#22
Originally Posted by slvrhwk
How is the road/drivetrain noise with the l/w carpet. I'm thinking about going this route.
#24
TECH Enthusiast
iTrader: (13)
Join Date: Nov 2001
Location: Chattanooga,TN
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
So what color is closer to the grey carpet in our cars? There are four that look very similar, Silver, Dark Grey, and Medium Pewter and Medium Opal. It is kind of hard to tell from their site.
#25
11 Second Club
iTrader: (20)
Join Date: Sep 2002
Location: Albuquerque NM - The Land of 8000ft DA
Posts: 2,686
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by Silver Slayer
So what color is closer to the grey carpet in our cars? There are four that look very similar, Silver, Dark Grey, and Medium Pewter and Medium Opal. It is kind of hard to tell from their site.
I'm sure they'll send you some snippets or scrap so you can compare.
#26
10 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Laconia, NH
Posts: 3,878
Likes: 0
Received 0 Likes
on
0 Posts
Yep, you can order a sample booklet for a couple of dollars. If your trying to match the factory Pewter carpet, there are two colors that are very close to it. Medium Graphite and and Medium Dark Pewter, medium opal is also pretty close. I went with the medium dark pewter. It's not a 100% perfect match but it looks good enough that it will match the door panels.
#29
10 Second Club
iTrader: (5)
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
The carpet comes in a roll so it's up to you and your skills as to how it looks installed. It takes some patients and work to get it right. I used 3M 77 spray adhesive for mine. Spray some on the floor and on the carpet wait a couple of min for it to get tacky and lay it down.
When I get my car back from the tranny shop I will take some pictures this weekend.
When I get my car back from the tranny shop I will take some pictures this weekend.
#31
10 Second Club
iTrader: (5)
Join Date: Jan 2003
Location: Fort Worth, TX
Posts: 1,455
Likes: 0
Received 0 Likes
on
0 Posts
The area where the back seat bottom cushions were hard to form (buckets) and the area right above it (flat area). The carpet bunches up there and doesn't want to lay flat. I had to make some cuts in that area.
#32
I got some Ozite carpet today. I Work at oreilly auto parts and i knew we carried carpet rolls and it turned out to be the same stuff. I paid 6$ a roll (employee cost). we have black,blue,gray and tan. If you guys have an Oreilly locally they should have a couple rolls in stock and be able to order as many as you want and have it next day with no shipping charge. its 9.95$ for a 78x36" roll. its located where the seat covers and car covers are. hope this helps.
#34
10 Second Club
iTrader: (8)
Join Date: Feb 2004
Location: Milwaukee, WI
Posts: 2,846
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BAIN
The area where the back seat bottom cushions were hard to form (buckets) and the area right above it (flat area). The carpet bunches up there and doesn't want to lay flat. I had to make some cuts in that area.
#39
12 Second Club
Join Date: Mar 2005
Location: Lincoln CA
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by al
Like I said fellas I`m not sure how to post pics, but I can e-mail someone pics to post on here of my glued down ozite. I`m getting ready to leave the house in about 10 mins. ,so if someone can post the pics. for me in the next 10 mins let me know. If not I can sent them tommrow.
#40
TECH Enthusiast
Join Date: Aug 2002
Location: Houston, TX.
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Like I said fellas I`m not sure how to post pics, but I can e-mail someone pics to post on here of my glued down ozite. I`m getting ready to leave the house in about 10 mins. ,so if someone can post the pics. for me in the next 10 mins let me know. If not I can sent them tommrow.