ATS carbon-fiber valve covers
11-07-2006, 09:20 AM
#1
ATS carbon-fiber valve covers One of our site sponsors unveiled a new product at SEMA last week. Carbon-Fiber (real) valvecovers! They looked kick *** and top-quality in person. They also use the factory O-ring gasket. These are also going to be available with or without the coil relocation brackets. Availability should be in a couple weeks or less.
The best part? Pricing may be under $500/pair with the relocation brackets!
https://ls1tech.com/SEMA_06/pages/IMG_3577.htm
Their website is www.T56kit.com
Tony
The best part? Pricing may be under $500/pair with the relocation brackets!
https://ls1tech.com/SEMA_06/pages/IMG_3577.htm
Their website is www.T56kit.com
Tony
Trending Topics
11-08-2006, 07:55 PM
#9
Launching!
Join Date: Aug 2002
Location: Los Angeles, CA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
The covers are tall enough to clear any aftermarket valvetrain, so there is a function to follow the form.
The covers will include 2 carbon valve covers, an oil fill cap, and either 1 vacuum port and a PCV valve or no provisions at all. Also included are the stainless steel coil pack relocation brackets, all hadware for the covers and coil packs, and a set of new GM gaskets. We will have an option for deletion of the coil brackets, but as they don't cost too much, there will not be a very big price reduction, probably under $50.
We just tested them with a Y body accessory system, and they WILL clear the alternator, so these should fit all applications of LSX engine and platforms.
I'm including a few more pics of the covers. Let me know if you guys want to get a set at the introductory price of $500. They will never be this cheap again, so this is the time to go for it. We will be ending our pricing discount after the 50th set is sold. Any order recieved after these first 50 will be at the regular retail pricing.
Tyler
PS- Intake is made by Kinsler.
The covers will include 2 carbon valve covers, an oil fill cap, and either 1 vacuum port and a PCV valve or no provisions at all. Also included are the stainless steel coil pack relocation brackets, all hadware for the covers and coil packs, and a set of new GM gaskets. We will have an option for deletion of the coil brackets, but as they don't cost too much, there will not be a very big price reduction, probably under $50.
We just tested them with a Y body accessory system, and they WILL clear the alternator, so these should fit all applications of LSX engine and platforms.
I'm including a few more pics of the covers. Let me know if you guys want to get a set at the introductory price of $500. They will never be this cheap again, so this is the time to go for it. We will be ending our pricing discount after the 50th set is sold. Any order recieved after these first 50 will be at the regular retail pricing.
Tyler
PS- Intake is made by Kinsler.
Last edited by Teetoe_Jones; 11-14-2006 at 04:05 AM.
11-08-2006, 08:23 PM
#12
KP, you are correct. The covers can be removed with the packs still attached to them. Neat feature.
Tyler, glad to hear they fit a Y-body
I knew they would, because I've seen similar shaped ones (alum) fit on the Corvettes too.
Tyler, glad to hear they fit a Y-body
I knew they would, because I've seen similar shaped ones (alum) fit on the Corvettes too.
11-08-2006, 09:08 PM
#13
LS1Tech Co-Founder
iTrader: (34)
How much taller than stock? I need to see if they clear my custom alternator setup:
http://psj.ls1tech.com/gallery/main....&g2_itemId=256
http://psj.ls1tech.com/gallery/main....&g2_itemId=256
11-08-2006, 10:52 PM
#14
10 Second Club
iTrader: (12)
Join Date: Dec 2004
Location: Birmingham, Alabama
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pro Stock John
How much taller than stock? I need to see if they clear my custom alternator setup:
http://psj.ls1tech.com/gallery/main....&g2_itemId=256
http://psj.ls1tech.com/gallery/main....&g2_itemId=256
11-10-2006, 12:20 PM
#19
7 Second Club
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
what will we do for crank case evac now?
just curious cause i do like these... but i just wish there was a way to have a fitting put on them
for a catch can or evac pump..
just curious cause i do like these... but i just wish there was a way to have a fitting put on them
for a catch can or evac pump..