silverZ98

iTrader: (6)

any one got any pics of a 28in ET Street or drag on there car? and what mods did you have to do to make sure htey fit or not rubed? and if you got pics of the mods post them up too

Taubr Unit

iTrader: (32)

in my sig. Did nothing but put them on. No rub or anything. its a 10.5x28'' et street radial

9sec93

iTrader: (67)

not a M/T but size should be similar. they fit no problem without rubbing but i ended up cutting a bit off the rear bumper cover and getting adj. lca's to center the tire better because they rubbed at high speeds due to tire growth.

Speed Density

iTrader: (38)

Your going to want extra space with a slick, remember they expand.

I hade some 28x10 ET drags that barley fit, I didnt want to cut my fenders so i switched to a 28x10 MT Drag Radial.

Here is the current tire on the car:



Tony.

SLPSS99

iTrader: (7)

Here is mine.

silverZ98

iTrader: (6)

thanks guys. im fitting some 28x12.5x16 et streets under car. they go on and dont rub, but are close to the fender right behind the door. that the only part im worring about right now. i rolled the hole fender lip lastnight to be safe there. thinking about cutting the botton of the fender behind the door about 1/2in then roll it up to look some what stock.

gator's 99TA

iTrader: (2)

click link in sig. its a radial and wide, but still 28" tall. a camaro will have to modify that rear cover. get some adj lcas

SLowETz

iTrader: (12)

28-12.50-15 ET Street's. BFH., Adj. LCA's, trim rear bumper cover. Good to go.
Old pic...... I've since cut the spacers off the Bogarts to tuck the wheels in an additional 3/4", and the car sits way down on the tires now.... no rubbing issues.

The1N_only

iTrader: (7)

Fast SS on TNT

iTrader: (1)

Here a few pics of my 28" ET Streets.

Matt D

iTrader: (49)

Mine is attached. Not the greatest pic but you get the point. I had to roll the lip and adjust the LCAs back a little bit. It was a 28x10.5x15s on a 15x10 Prostar.