ls1pwrdss

iTrader: (74)

what size gears and stall do i need to run 28x10x15 hoosier slicks

ATVracr

iTrader: (5)

Need more info from ya.

Mods?
What does the car run?

1SlowFormula

Once you know some of the stuff ATVracr asked you can use the calculator in my sig to determing optimal gear ratio for your estimated 1/4 MPH and Trap RPM...

There are instruction on the right to help you out...

ls1pwrdss

iTrader: (74)

ok last time i ran the car it ran 12.90 at 109mph
all i had done was slp air lid
now i have qtp long tubes and tsp true duals
complete umi susspension front and rear
now have hp tunners
has 3.23 gears in it
so im buying a set of convo pros and hoosier tires
plan on putting a ms4 cam in it with stock heads
just need to know what sise stall and gears

Matt D

iTrader: (49)

If you're keeping it on motor, 4400-4600 stall, 4.10 gear and a 28" tire, or 3.73 gear and a 26" tire. I personally run a 4500 stall & 3.73 gear on a 26" tire. Full suspension, full boltons.

ls1pwrdss

iTrader: (74)

man thats awsome to run 10's cam only
how much weight reduction do you have and are convo pros light enough

tektrans

iTrader: (23)

what he said.

Matt D

iTrader: (49)

The car weighed 3275 with me in it (I weigh 160). Those times were on a 26" MT drag radial and I had a 4600 converter. Here is a link to my FQuick page with all of the mods: http://www.fquick.com/garages/Chevro...Z28/2000/1965/

Yeah, the Convo Pros are light enough. That is what I have for my 99 Z28. Again, with a 26" MT drag radial & 3.73 gears.