Drag Racing Tech
Sponsored by:
Sponsored by:

Upgrades needed to make a C5 run single digits

Thread Tools
 
Search this Thread
 
Old 03-25-2007 | 08:03 PM
  #21  
FASTFATBOY's Avatar
TECH Veteran
iTrader: (23)
 
Joined: Nov 2002
Posts: 4,860
Likes: 2
From: Mobile Ala
Default

Here's THE most important mod......$'sx3=speed


David
Old 03-25-2007 | 08:54 PM
  #22  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

Originally Posted by Mr Powell
Yeah he had never made a pass on n2o, plus last pass he made was the 2nd rear ends last day LOL!! It started off with shattering the long side. Then he had the output shaft on the tranny and destroyed the first inside LOL. 2nd time it was just a tiny bit of wheel hop on a really sticky track He let out hoping the 1 second of it would not hurt it. Sure enough we jacked up the rear-end we started pulling out chunks of aluminum. When we got it up on a lift and lowered the cradle the rear-end came down with it and part of the tailshafts housing LOL!

You going to use the dry kit on the new motor or going a different route? We had a dry shot with the large NOS solenoid and a NOS nozzle with no jet. Made ~200rwhp extra. Was it a lot better to control because it was not a huge torque spike.
Yea, will be running the dry again, in three stages for a starting 300rwhp shot. Will be trying to keep the torque in check and have more of a boosted type curve. Nozzle location and style have a lot to do with getting a more progressive hit on the dry also.

keep us updated on your brothers car, it surely will be a 9's car when he has it ready and able.
Robert
Old 03-25-2007 | 11:09 PM
  #23  
Juiced6's Avatar
Thread Starter
Teching In

 
Joined: Apr 2006
Posts: 24
Likes: 0
From: IL/WI Border
Default

robert and mr powell - big thanks on the info - this is exactly what i am looking to do

as for breaking - dont care too much i have a tdi as the work commuter/grocery getter - this would be the fun car - and the nova is the dedicated drag car

i just want something for the street to drive around on but make a pretty serious pass at the track

i know what you mean about how to drive - had a high 11second vw gti - those 5 speeds have to be the weakest things ever created
Old 03-25-2007 | 11:16 PM
  #24  
ninetres's Avatar
9 Second Club
iTrader: (35)
 
Joined: Nov 2005
Posts: 3,128
Likes: 4
From: Mufflerville, CA
Default

Originally Posted by dacajun
Well that just goes to show how fast they are going. These two videos are both on 1/4 mile tracks. Take a look at the MPH on the C4, 199mph. If this would be an 1/8 track, that would have to be a Top Fuel car to get that kinda a MPH. Sorry dude, both 1/4 tracks.
lol

Dude, it was a joke. I know that wasn't the 1/8
Old 03-26-2007 | 01:41 AM
  #25  
dacajun's Avatar
TECH Apprentice
iTrader: (19)
 
Joined: Jun 2004
Posts: 395
Likes: 4
Default

Originally Posted by ninetres
lol

Dude, it was a joke. I know that wasn't the 1/8

Alright, I'm glad with got that clear. You just never know what some people believe on this site.
Old 03-26-2007 | 09:40 AM
  #26  
Elite_Hot_Rod's Avatar
TECH Addict
 
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
Default

Dave you never did say what you are setting the car up for, are you going to run it in a class? I'd like to see it run when it's ready to go.




All times are GMT -5. The time now is 03:13 AM.