Post pictures of your roll bar/cage
#21
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If you look at the 3rd picture down in that link, there's a good shot of the rollbar with drivers seat. I put the padding alont the main hoop from the leg coming foreward up to the top of the main hoop, then put padding along the drivers side 1/2 of the top of the main hoop. Car's been to the track several times and gone thru tech that way, and I used the SFI padding that summit sells. I am gonna add a couple zip ties to it to secure the padding better, when it's 100 degrees out the glue on the velcro gets soft, unfortunately I've been to the track twice when it was that hot out, and found out when I went to push the car back, the padding and velcro wanted to come right off. As soon as it cooled off/got the car home it was stuck good again, kinda wierd. Zip ties will solve that once and for all though.