SFI 25.2 Mustang/LSx build "The Renegade"
06-29-2009, 12:50 PM
#1911
Finally got all the leaks buttoned up
Wiring is done
Dash is installed
IC is Plumbed
Rockers are lashed
Now I am just working on the rear suspension playing with the IC vs height. Had to send the BS3 out for a update on the firmware should have it back friday to maybe play this sunday.
Wiring is done
Dash is installed
IC is Plumbed
Rockers are lashed
Now I am just working on the rear suspension playing with the IC vs height. Had to send the BS3 out for a update on the firmware should have it back friday to maybe play this sunday.
06-29-2009, 02:03 PM
#1912
06-29-2009, 05:23 PM
#1913
8 Second Club
iTrader: (40)
Join Date: Aug 2005
Location: Raleigh,North Carolina
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Finally got all the leaks buttoned up
Wiring is done
Dash is installed
IC is Plumbed
Rockers are lashed
Now I am just working on the rear suspension playing with the IC vs height. Had to send the BS3 out for a update on the firmware should have it back friday to maybe play this sunday.
Wiring is done
Dash is installed
IC is Plumbed
Rockers are lashed
Now I am just working on the rear suspension playing with the IC vs height. Had to send the BS3 out for a update on the firmware should have it back friday to maybe play this sunday.
06-29-2009, 05:32 PM
#1914
Man, I just got my BS3 ECU back today. It took a good 10 days once they got it. Leo did say that mine was the first LS1 box to get their latest Y8 SL firmware. Got another header with 2nd fan control wire on it now. He said it is a little involved for the latest firmware, but it is worth it. We will see, I mainly wanted WOT fan shutoff. He says there have been some improvements to the replay function as well.
06-30-2009, 09:09 AM
#1915
Getting the land missle ready for battle and everyone is very excited. Last year we went 5.0s our 3-4 pass out with about 300 less HP and not really leaning on the tuneup. Needless to say we're all ready to get this process started.
Still need to:
Give a Bath
Clearance passenger fender
Set pinion angle and IC.
Still need to:
Give a Bath
Clearance passenger fender
Set pinion angle and IC.
06-30-2009, 09:37 AM
#1916
Getting the land missle ready for battle and everyone is very excited. Last year we went 5.0s our 3-4 pass out with about 300 less HP and not really leaning on the tuneup. Needless to say we're all ready to get this process started.
Still need to:
Give a Bath
Clearance passenger fender
Set pinion angle and IC.
Still need to:
Give a Bath
Clearance passenger fender
Set pinion angle and IC.
man she's lookin good, gotta love the down home feel of the rusty rotors and wheel studs
just messin with you man. i'm sure they'll clean up after that first pass coming down from 200mph tho 
06-30-2009, 10:15 AM
#1917
Yeah, they are only a sign of how long its been. With the car going 192 on 25# of boost almost 4 seconds into the run everyone is expecting a big number once we get it shook down. This motor should easily make a couple hundred more than it did last year.
06-30-2009, 02:09 PM
#1918
TECH Veteran
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
