K-members??
Thanks for your support. If you have any questions please give us a call. Our tech/sales dept is open till 6PM EST. Mon-Fri.
Call Me Please call me at the shop 507-243-4104 I would like to know what specific problems you had with your K-member, because this is the first I have heard of a problem with our product. I would expect a phone call from a customer that bought a part that didn't fit properly. I will wait for your call.
Thanks,
Mark Wilkinson
http://www.racecraft.com
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Chef I don't think that Madman actually makes a K member, he uses the Burkhart one on most of his builds if I remember correctly.
A question for the suspsnsion manufacturer's that you probably can answer, could a k member be made that has a removable center? meaning the crossbar, could that be made so that it bolts in, so that you could easily remove the oil pan with the motor in the car?
This of course would be a race only piece, requiring a motor plate like the Burkhart piece and steet use would be a no no I understand that.
A question for the suspsnsion manufacturer's that you probably can answer, could a k member be made that has a removable center? meaning the crossbar, could that be made so that it bolts in, so that you could easily remove the oil pan with the motor in the car?
This of course would be a race only piece, requiring a motor plate like the Burkhart piece and steet use would be a no no I understand that.
Chef I don't think that Madman actually makes a K member, he uses the Burkhart one on most of his builds if I remember correctly.
A question for the suspsnsion manufacturer's that you probably can answer, could a k member be made that has a removable center? meaning the crossbar, could that be made so that it bolts in, so that you could easily remove the oil pan with the motor in the car?
This of course would be a race only piece, requiring a motor plate like the Burkhart piece and steet use would be a no no I understand that.
A question for the suspsnsion manufacturer's that you probably can answer, could a k member be made that has a removable center? meaning the crossbar, could that be made so that it bolts in, so that you could easily remove the oil pan with the motor in the car?
This of course would be a race only piece, requiring a motor plate like the Burkhart piece and steet use would be a no no I understand that.
Please keep us in mind as well. We offer a never nice set-up intended for drag racing and street driving. Our K-members can also be built with no motor mounts and less powder coat if desired as well.
We also offer some nice front end drag kits seen below. If you have any questions please let me know. Thank you!
Ryan
http://www.umiperformance.com/produc...ategory_id=137
We also offer some nice front end drag kits seen below. If you have any questions please let me know. Thank you!
Ryan
http://www.umiperformance.com/produc...ategory_id=137
