5 pt harness question
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
5 pt harness question I bought a simpson camloc 5 pt, roll bar wrap harness
there aren't any brackets at the end of the points, what are you guys using to connect them to the car?
I've seen the crotch mounts, do I need to get more for the side harnesses?
there aren't any brackets at the end of the points, what are you guys using to connect them to the car?
I've seen the crotch mounts, do I need to get more for the side harnesses?
Man I think I know what your talking about, I got a set of 5 point cam lock Stroud harnesses and they were like that. I ordered the wraparound type for my wolfe roll bar and they came in without any eyelets at all. Even the crotch straps and lap belts didnt have anything in them to run a bolt through. I called stroud and they got with the place I ordered them from and they ask me to send them back to stroud so they coud add anchor brackets to the lap belts. If you run the Wolfe crotch strap mounts you wont need anything on the crotch strap, leave it wrap around style. Hope this helps.
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
Here is what I need I think:
http://store.summitracing.com/partde...5&autoview=sku
BUT it says it is ONLY for 2" wide belts....mine are 3" ?!?!
http://store.summitracing.com/partde...5&autoview=sku
BUT it says it is ONLY for 2" wide belts....mine are 3" ?!?!
Thread Starter
TECH Junkie
iTrader: (19)
Joined: Feb 2005
Posts: 3,155
Likes: 0
From: Sandusky, Ohio
They aren't Simpson, but I guess these should work
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Trending Topics
They aren't Simpson, but I guess these should work
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
Here's a link to the Wolfe crotch strap mount, its one less hole you'd have to drill and it looks really clean.
http://www.wolferacecraft.com/detail.aspx?ID=252
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I just used the stock seat belt mounting locations for mine. 
Last edited by Drake; Mar 23, 2008 at 07:53 PM. Reason: Disregard, I figured out what you're talking about. Posted too quickly.
