Weird tire problem , need your input.
Last edited by WS6HUMMER; May 3, 2008 at 11:14 PM.
if it is , it kinda seems like the air was seeping through the layers and finiding its way to the last layer of rubber. i had that happen on a regular z rated tire, didn't heut the tire but i chaged it anyway ( funny thing is , the bulge was still holding air with the tire off the rim)
if it is , it kinda seems like the air was seeping through the layers and finiding its way to the last layer of rubber. i had that happen on a regular z rated tire, didn't heut the tire but i chaged it anyway ( funny thing is , the bulge was still holding air with the tire off the rim)
Yeah that's exactly what it appears to be, if you push on the bulge you can still feel side wall behind it and it is holding air too.
Call them, show them the picture, they may want you to send that one back, when you talk to them be polite but concerned, tell them you like the tires alot but are concerned about this.
Chances are you'll get a new pair, and have to ship that one back so they can see it.
Trending Topics
The Best V8 Stories One Small Block at Time
Thanks, I called Hoosier this morning and spoke with someone. He didnt say that he would do anything but did ask me to e-mail him the pic. I hope they will make good on it.
i have never seen that on a slick, but on street tires 99% of the time that is an impact break. its not a defect it is classified as a road hazard and most companies wont warranty it. happens when a tire brushes up on a curb or a pothole the wrong way and causes a weak spot in the sidewall and the air pressure pushes out the bubble. curious as to how that would happen on a race tire. my guess would be an irregularity where the inner liner seam is






