Fast_94_Z

iTrader: (12)

did a search and didnt come back with anything good. i want to trim the cowl area up to the windshield. post your pics please so i can get some good ideas.

9sec93

iTrader: (67)

Fast_94_Z

iTrader: (12)

anyone know the guy with the red formula?

Z06kern

iTrader: (18)

Best pic I have.

dlove

iTrader: (23)

once the search comes back, there was a thread about this a few months ago with lots of pictures

Jon@Texas-Speed

iTrader: (18)

I just finished spot welding mine in this weekend. I will try to get some pics for you tonight.

87Lt1Monte

iTrader: (1)

Bump for this thread.. im about ready to do this but ... im scared

Fast_94_Z

iTrader: (12)

that camaro is sick. tell me about ur setup im curious. anyone else got pics?

JRcamaroZ28

iTrader: (41)

87Lt1Monte

iTrader: (1)

Very nice .. what guage metal did you use to cover with? and what kind of paint did you use to paint under there?

firefighting1101

iTrader: (48)

very nice, i will be doing this soon so this was very informative for me!

Fast_94_Z

iTrader: (12)

Nice!

RAGENZ28

iTrader: (5)

To be legal you need to use at least .024 steel or .032 aluminum for firewalls

JRcamaroZ28

iTrader: (41)

i used 16ga steel and the paint was just krylon semi-flat black

strokedz383

I need to pull the windshield and do a little more trimming then weld a panel on but it was nice sitting the motor and tranny in from the top. Plus I went old school still running a dizzy.

Fast_94_Z

iTrader: (12)

clear that engine bay while you have the motor out

Ego Killer

iTrader: (147)

like to see more pics also...

Fast_94_Z

iTrader: (12)

theres a lot of guys on here that have this i know of it. post up some more pics plz.

OutlawZ

iTrader: (4)

I had to trim the hell out of my cowl but I didn't do a full trim. More like cut a huge square in the center to fit my induction hat for my accufab throttle body. I hated the way it looked so the guy who did my door panels hand built a fiberglass panel and painted it flat black. This is the first mock up which fit perfect but we still have a few things to do like paint the bolts black and bolt down in two more spots.... It's removable in about 3 minutes using nut plates behind the screws into the panel. And we countersunk the holes to flush mount the screws......

RAGENZ28

iTrader: (5)

OutlawZ sent you a PM. After I get my hood I might actually cut my window back some and move the fire wall back to set the engine back some and make more room up front for the turbos and intercooling.

Anyone have photos of their motor set back or a notched lexan front window? I am talking about something like this.