When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The goal was to not use race gas in it, if i was going to use it i would have gone 13.5:1 and made some real power. For a streetable pump gas motor it gets the job done.
I think it should get down into the 9's, hopefully.
I agree, that same setup with 13.5 to 14 to 1 compression would probably be south of 650.
Makes me want to build a BIG ci n/a motor nect go around at it.
The goal was to not use race gas in it, if i was going to use it i would have gone 13.5:1 and made some real power. For a streetable pump gas motor it gets the job done.
I think it should get down into the 9's, hopefully.
I am from Shenandoah, about an hour north of Reading on Rt 61
I know the area fairly well. I will move back eventually, family and friends still there. Now get that thing to Maple Grove before they close up shop for winter.
I know the area fairly well. I will move back eventually, family and friends still there. Now get that thing to Maple Grove before they close up shop for winter.
Cecil is open until it snows, i'll get there before the year's end.
Good luck on getting into the 9s, but I think it is going to be tough with that weight. Hopefully you got a good suspension setup because you are going to need a real good 60' with your weight to get it in to the 9s with a stick.