Dyno Results: MS3, 5.3L Heads, Fast 92
#85
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am running this same setup in my '72 SS Camaro [Fast 92/92 is not ported]
8.5 10 blt with Detroit lkr,4.56's ,m6.
I leave on the limiter at 6900 rpm & side step the clutch [stock rod bolts for 5yrs,20k miles]shift at 6600 rpm . Well my best times are 11.43 at 119 1/4 mi.7.30 in the 1/8...
These were on ET streets & consistancy was not to be had .. I now am running ET drags .Tonight I pulled the MS3 & installed a Pat G custom cam with EPS lobes to get more trq dwn low as the MS3 is lacking & stick cars NEED !Oh ye there is a set of Katech Rod bolts going in also.
Anyway I put 20k on this cam, 3 PWR tours ,4 sets of tires ,3 RAM hd's....#!*^#!!! Monster stg 3 now.It was alot of fun & with a Geoff Skinner tune I could cruise at idle [950rpm] without bucking or surging 95% of the time !
Car put 430 rwh /390rwtq with a LS6 intake & Thunder Racing P&P TB .It ran 11.53 to 11.58 's with this setup.Car is 3400lbs without me [190lbs] in it .
If you want to see some video of it pm me for the link .
8.5 10 blt with Detroit lkr,4.56's ,m6.
I leave on the limiter at 6900 rpm & side step the clutch [stock rod bolts for 5yrs,20k miles]shift at 6600 rpm . Well my best times are 11.43 at 119 1/4 mi.7.30 in the 1/8...
These were on ET streets & consistancy was not to be had .. I now am running ET drags .Tonight I pulled the MS3 & installed a Pat G custom cam with EPS lobes to get more trq dwn low as the MS3 is lacking & stick cars NEED !Oh ye there is a set of Katech Rod bolts going in also.
Anyway I put 20k on this cam, 3 PWR tours ,4 sets of tires ,3 RAM hd's....#!*^#!!! Monster stg 3 now.It was alot of fun & with a Geoff Skinner tune I could cruise at idle [950rpm] without bucking or surging 95% of the time !
Car put 430 rwh /390rwtq with a LS6 intake & Thunder Racing P&P TB .It ran 11.53 to 11.58 's with this setup.Car is 3400lbs without me [190lbs] in it .
If you want to see some video of it pm me for the link .