427 Solid roller numbers
Thread Starter
10 Second Club
iTrader: (25)
Joined: Dec 2004
Posts: 2,554
Likes: 1
From: Kannapolis, NC
Best of the night was a 1.43 60' and 6.664 @ 104 with the wheel up in 1st and 2nd gear with only 17* of timing. Must of had bad gas cause we started with 24* on the 93 octane and it was pulling 4-5 * out so we kept backing the timing out of it and adding fuel. Shock settings were full soft ext and full hard comp front and full loose ext in the rerar and about 4 clicks from full loose comp in the rear.


