Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

Vengeance Racing 440 LSX Dyno/Video/NITROUS results inside!!! 819RWHP/909RWTQ!!!!

Thread Tools
 
Search this Thread
 
Old 08-13-2009 | 03:12 PM
  #1  
Ron@Vengeance's Avatar
Thread Starter
FormerVendor
iTrader: (51)
 
Joined: Nov 2001
Posts: 5,628
Likes: 1
From: Cumming GA
Default Vengeance Racing 440 LSX Dyno/Video/NITROUS results inside!!! 819RWHP/909RWTQ!!!!

Built this combo last August. Customer just returned to do some nitrous tuning. We started off with 150 jets and worked our way up to the 250 jets on the Nitrous Outlet 90mm Plate Kit... The result... 965HP/1075TQ @ the flywheel!!! Dyno Graph attached!!!!



See below for all information/build details!!!


Pulled this one off the dyno this morning guys....

Car: 2002 Camaro SS M6

Modifications Include:

ProLine/Vengeance Spec 440 LSX Shortblock
-GM LSX Block
-Callies Crankshaft
-Callies Connecting Rods
-Diamond Pistons/Ring Pack
-Clevite Bearings
-Katech C5R Timing Chain

TrickFlow 235cc CNC Cylinder Heads-6 bolt/cylinder option
Vengeance Spec Camshaft
Yella Terra Ultra Lites
Comp Lifters
Melling Pump

FAST 92mm Manifold
Modified to 96mm
Nick Williams 96mm Throttlebody
Fast Toys Air Box
Silicone Coupler

American Racing 1 7/8 x 2 x 3 1/2 Longtubes
DMH Dual Electric Cutouts
SLP Dual Dual Catback

RPS Twin Organic Clutch kit
Moser 9" Rear
Steel Driveshaft
315 Drag Radials

Built/Installed/Tuned (Speed Density)@ Vengeance Racing
582RWHP
534RWTQ



http://www.youtube.com/watch?v=CBqmIz6ENgM

Last edited by Ron@Vengeance; 06-10-2010 at 09:25 AM.
Old 08-13-2009 | 03:23 PM
  #2  
TrentSS's Avatar
TECH Apprentice
 
Joined: Apr 2002
Posts: 373
Likes: 0
From: Hickory, NC
Default

Awesome Ron! What gear in that 9"? Going to be a handful for sure...great job as always.
Old 08-13-2009 | 05:37 PM
  #3  
caviness's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Apr 2006
Posts: 698
Likes: 4
From: Liberty,NC
Default

badass car and build,big power for sure.
Old 08-13-2009 | 05:58 PM
  #4  
RJB01camaross's Avatar
TECH Enthusiast

 
Joined: Mar 2008
Posts: 635
Likes: 0
From: Largo,FL
Default

That thing sounds BAD ***!!!!
Old 08-13-2009 | 06:04 PM
  #5  
03supercobra's Avatar
TECH Regular
iTrader: (38)
 
Joined: Sep 2008
Posts: 498
Likes: 0
From: edmond, ok
Default

Very nice, i should be done with my 443 LSX soon. Im hoping it will put down close to these same numbers. Good build!
Old 08-13-2009 | 06:34 PM
  #6  
Chris05ssTruck's Avatar
TECH Resident
iTrader: (9)
 
Joined: Aug 2006
Posts: 963
Likes: 1
From: P'cola, FL
Default

Bitch sounds MEAN! Good #'s w/ the fast holding it back and all....congrats!
Old 08-13-2009 | 07:01 PM
  #7  
blu byu EH's Avatar
10 Second Club

iTrader: (25)
 
Joined: Aug 2007
Posts: 728
Likes: 0
From: STL
Default

OH **** dan!
Old 08-13-2009 | 10:21 PM
  #8  
LS1 SPEED's Avatar
Banned
iTrader: (22)
 
Joined: Jan 2004
Posts: 4,957
Likes: 0
From: Schaumburg,IL
Default

great results guys!
Old 08-13-2009 | 10:40 PM
  #9  
tenacious z's Avatar
On The Tree
 
Joined: Apr 2005
Posts: 107
Likes: 0
From: Wentzville, MO
Default

Can't wait to go for a ride in this thing!
Old 08-14-2009 | 02:37 AM
  #10  
kumar75150's Avatar
TECH Fanatic
 
Joined: Mar 2003
Posts: 1,112
Likes: 0
From: Dallas
Default

damn you guys are cranking out some big motors. very nice
Old 08-14-2009 | 06:29 AM
  #11  
venom ws7's Avatar
11 Second Club
iTrader: (13)
 
Joined: Jul 2003
Posts: 5,965
Likes: 1
From: EARTH
Default

badass work like always Ron and everyone at VR.

Congrats to the owner.

Ron how much compression??? how big is the cam??
TQ Curve is awesome.
Old 08-14-2009 | 06:50 AM
  #12  
Dutchman427's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Dec 2007
Posts: 347
Likes: 0
From: Blandon,PA
Default

Very nice Ron.
Old 08-15-2009 | 12:57 AM
  #13  
PREDATOR-Z's Avatar
TECH Senior Member

 
Joined: Mar 2004
Posts: 14,620
Likes: 16
From: BFE
Default

Nice combo congrats

serious overlap
Old 08-17-2009 | 10:12 AM
  #14  
Ron@Vengeance's Avatar
Thread Starter
FormerVendor
iTrader: (51)
 
Joined: Nov 2001
Posts: 5,628
Likes: 1
From: Cumming GA
Default

Thanx guys!!!
Old 08-17-2009 | 10:59 AM
  #15  
allngn_c5's Avatar
TECH Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Default

What are the cam specs on this monster ??

250ish ??
Old 08-17-2009 | 11:13 AM
  #16  
PewterScreaminMach's Avatar
TECH Addict

iTrader: (7)
 
Joined: Sep 2006
Posts: 2,628
Likes: 2
From: Austin, TX
Default

Awesome! That Camaro is BADASS. I'd hate to run up next to him and think I stood any kind of a chance. He should go Cobra hunting.
Old 08-18-2009 | 10:24 PM
  #17  
BOTTLEFEDLS1Z's Avatar
11 Second Club
iTrader: (32)
 
Joined: Oct 2003
Posts: 638
Likes: 0
From: STL
Default

Thanks guys for all the compliments! I couldn't be happier with the car.


I flew down yesterday to pick it up and this thing is pretty nasty! I can't say enough about the attention to detail and the amount of work Vengeance put into this car. NOTHING was left undone or was half assed. I drove the car 8 hours home and didn't have 1 issue at all. Car was getting 23.33 MPG's WITH the A/C too. Gotta give thanks to a few people!!!

RON- I can't thank you enough for everything you've done for me. Thanks for talking me into the bigger motor and just your overall knowledge about these LSX's. Your attention to detail and your organization never cease's to amaze me. I like the fact that you and I went over the entire car, answered all my questions and had all the paperwork for the new motor. BTW, your a funny *** mother ******. I think the drive thru at McDonalds did it for me! LOL

Mike- As always, another badass tune in this car. Thing drives like a champ and flat out runs its nuts off when the pedal goes to the floor. I'm EXTREMELY impressed with the driveability with this motor and the fact I can cruise around with the A/C on. Your attention to detail with tuning is very evident in the way this car acts! I appreciate it!!!!!!

Buddy- Not sure if your gonna read this or not, but like I said to you yesterday, you did one hell of a job installing everything. Thanks once again

Charlie- Thanks for all you did as well.

Mike B- I don't even know what to say. I've never laughed so hard at some of the **** you did yesterday. Ron and you had me cracking up. Nice to meet you!!!

"hey girl...........I SAID, HEY GIRL....................HEY GIRL


To sum it up, Vengeance has a hell of a crew down there

Last edited by BOTTLEFEDLS1Z; 08-18-2009 at 10:44 PM.
Old 08-18-2009 | 10:34 PM
  #18  
ryan@rpm's Avatar
FormerVendor
iTrader: (5)
 
Joined: Nov 2002
Posts: 305
Likes: 0
From: Bunn, NC
Default

Great job guys ! It's always good to see a happy customer and a buisness that will go the extra mile for you !
Old 08-18-2009 | 11:53 PM
  #19  
Soul TKR's Avatar
TECH Junkie

iTrader: (4)
 
Joined: Jun 2004
Posts: 3,543
Likes: 2
From: San Diego, CA
Default

wow.... damn near 600rwhp N/A

Impressive!

Curious what the mileage life of a motor like this typically is... if taken well care of and the maintenance and all of course...

One thing I like about Vengeance is they always showcase a ton of crazy *** builds on here...
Old 08-19-2009 | 03:50 AM
  #20  
allngn_c5's Avatar
TECH Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Default

Originally Posted by bottlefedls1z
thanks guys for all the compliments! I couldn't be happier with the car.


I flew down yesterday to pick it up and this thing is pretty nasty! I can't say enough about the attention to detail and the amount of work vengeance put into this car. Nothing was left undone or was half assed. I drove the car 8 hours home and didn't have 1 issue at all. Car was getting 23.33 mpg's with the a/c too. Gotta give thanks to a few people!!!

Ron- i can't thank you enough for everything you've done for me. Thanks for talking me into the bigger motor and just your overall knowledge about these lsx's. Your attention to detail and your organization never cease's to amaze me. I like the fact that you and i went over the entire car, answered all my questions and had all the paperwork for the new motor. Btw, your a funny *** mother ******. I think the drive thru at mcdonalds did it for me! Lol

mike- as always, another badass tune in this car. Thing drives like a champ and flat out runs its nuts off when the pedal goes to the floor. I'm extremely impressed with the driveability with this motor and the fact i can cruise around with the a/c on. Your attention to detail with tuning is very evident in the way this car acts! I appreciate it!!!!!!

Buddy- not sure if your gonna read this or not, but like i said to you yesterday, you did one hell of a job installing everything. Thanks once again

charlie- thanks for all you did as well.

Mike b- i don't even know what to say. I've never laughed so hard at some of the **** you did yesterday. Ron and you had me cracking up. Nice to meet you!!!

"hey girl...........i said, hey girl....................hey girl


to sum it up, vengeance has a hell of a crew down there


+1000 !


Quick Reply: Vengeance Racing 440 LSX Dyno/Video/NITROUS results inside!!! 819RWHP/909RWTQ!!!!



All times are GMT -5. The time now is 05:58 PM.