guys with super victor intake step in

Reply Subscribe

Thread Tools

Search this Thread

Jan 9, 2010 | 11:10 AM

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

guys with super victor intake step in

I want to see dyno sheets for super victor cars specially above 7000rpm
i have stroked motor and I'm thinking to switch the 90 Fast to super victor so i can spin the motor to 7400

Jan 9, 2010 | 03:48 PM

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

any body ??

Jan 10, 2010 | 09:56 AM

Cold Zero

TECH Regular

iTrader: (1)

Joined: Jun 2007

Posts: 412

Likes: 0

From: Saudi Arabia, Qatif

If you are looking for the max power you need to use the victor jr without elbow !
I recommend to use 1000 cfm TB ( 4 bbl ) with scope in your hood

my friend has done an A4 GTO 383cid with carb setup without an elbow and he put down 520 rwhp with small headers

elbow is a restrection .. there is a member here from Kuwait have 408 with ls1 intake and put down 460 rwhp .. and after the victor jr with an elbow it made 430 rwhp !! .. 30 hp less than ls1 intake !

Put in mind that the cam specs can play alot in this setup

Jan 10, 2010 | 10:04 AM

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

sure i will use a 4 bbl tb with a hood scoop
but i want to see dyno sheets for the top end rpm 7000+

Jan 10, 2010 | 10:09 AM

Cold Zero

TECH Regular

iTrader: (1)

Joined: Jun 2007

Posts: 412

Likes: 0

From: Saudi Arabia, Qatif

If you gonna do it with 4 bbl TB then do it without looking to dyno sheet

I hope to see those aggressive numbers with an M6 like 560 rwhp .. good luck

Jan 10, 2010 | 10:12 AM

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

i don't think it will reach 560 i hope it will reach 530 because my heads ( Patriot stage 2 )
are killing me at this point
but i hope the curve will not drop after 7000+

Jan 10, 2010 | 10:56 AM

Cold Zero

TECH Regular

iTrader: (1)

Joined: Jun 2007

Posts: 412

Likes: 0

From: Saudi Arabia, Qatif

If wanna sold them , my friend is looking for some

get some CNC LS3 Heads and you will be there with lower price
Omar 408 running those CNC LS3 Heads

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Jan 10, 2010 | 02:44 PM

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

Quote:

Originally Posted by Pimpium57

Is your current Fast 90 outta-the-box or ported?

outta-the-box

Jan 10, 2010 | 02:57 PM

#10

Nitroused383

9 Second Club

iTrader: (10)

Joined: Aug 2008

Posts: 2,817

Likes: 6

From: Washington

Super victor is a much higher flowing intake than the victor jr.

Jan 10, 2010 | 03:00 PM

#11

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

Quote:

Originally Posted by Nitroused383

Super victor is a much higher flowing intake than the victor jr.

Yes it is
and i will go for the ported version with 1000cfm 4bbl throttle body

Jan 10, 2010 | 03:07 PM

#12

Nitroused383

9 Second Club

iTrader: (10)

Joined: Aug 2008

Posts: 2,817

Likes: 6

From: Washington

1000 cfm throttle body will be choking the setup. A 90mm fast throttle body flows around 1200-1300 cfm.

Jan 10, 2010 | 03:11 PM

#13

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

i don't think our heads need 1300 cfm
could any body correct me if I'm wrong but i think our heads flow nearly 320 cfm

Jan 10, 2010 | 03:12 PM

#14

casper383

Launching!

iTrader: (8)

Joined: Aug 2008

Posts: 274

Likes: 0

From: Waco, Tx

i would like to see some results with the super vic, ill be running one on my hydraulic setup, 364ci, TFS 235s, 14to1

Jan 10, 2010 | 04:00 PM

#15

Nitroused383

9 Second Club

iTrader: (10)

Joined: Aug 2008

Posts: 2,817

Likes: 6

From: Washington

Quote:

Originally Posted by wesam

i don't think our heads need 1300 cfm
could any body correct me if I'm wrong but i think our heads flow nearly 320 cfm

A stock ported 78mm throttle body can flow 700-800 cfm. Most cars can benefit from a larger 90mm throttle body. Hey man if you don't think you need a 1300 cfm throttle body I doubt you need a super victor. Not sure what qualifications or evidence you have to back this theory up. Keep in mind the cam requirements for a carb style intake are much different than our OEM style intakes.

Jan 10, 2010 | 05:26 PM

#16

s346k

TECH Junkie

iTrader: (4)

Joined: May 2005

Posts: 3,433

Likes: 1

From: johnson co.

aer you hoping to make power above 7k with this setup?

LQ9 408 11.2 CR full ARP | Patriot LS6 stage 2 | 239/242 .651 .615 114+2

if so...as said in taken....good luck.

Jan 10, 2010 | 06:29 PM

#17

Slowhawk

LS1Tech Sponsor

iTrader: (12)

Joined: Nov 2001

Posts: 14,865

Likes: 6

From: Bridgewater,Ma

I should have an answer next week. My car is a 427ci with Super victor,custom elbow that flows stupid high #'s and a 105mm TB.

Jan 12, 2010 | 11:05 PM

#18

wesam

Thread Starter

On The Tree

Joined: Mar 2007

Posts: 182

Likes: 0

Quote:

Originally Posted by s346k

aer you hoping to make power above 7k with this setup?

LQ9 408 11.2 CR full ARP | Patriot LS6 stage 2 | 239/242 .651 .615 114+2

if so...as said in taken....good luck.

I called Patrick G regarding the cam and the whole combination he told me it will work and will net some thing between 30-40 whp

Jan 13, 2010 | 07:44 AM

#19

toby

On The Tree

iTrader: (1)

Joined: Nov 2005

Posts: 127

Likes: 1

that cam is nowhere close to what is needed for a single plane intake. a factory style intake and a single plane require different valve timing events. i think that is what s346k is trying to say.