EPS Cam only Dyno Results
#1
Thread Starter
12 Second Club
iTrader: (18)
Joined: May 2005
Posts: 2,124
Likes: 1
From: San Antonio,Tx
EPS Cam only Dyno Results
Well recently called up Geoff to recommend a nice cam only cam, he persuaded me to go with the 234/246 .601/.606 on a 111lsa cam. I ordered a set of tsp 7.425 pushrods, PowerBond U/D pulley and shorter belts, FAST 90 intake with a NW 90mm tb, PRC .650 Dual springs and had some stuff powdercoated.
I have an apt for a tune session with Kurt and PatrickG this coming thursday, so ill update the thread with the dyno results.
Currently already had:
Pacesetter Coated LT's
3inch Y
16'' Dynamax bullet dumped over the rear axle
Centerforce Dual Friction Cluth
Fidanza billet steel flywheel
New mods:
EPS 234/246 .601/.606 111 lsa
PowerBond U/D pulley and belts
Fast 90mm intake
Nick Williams 90mm tb
TSP 7.425 pushrods
PRC .650 valvesprings
New o2's
New set of Ngk tr55 plugs
New fuel filter
New K&N aircleaner
New Prothane Black motor mounts
Here are some pics and a vid of its idle untuned.
intake before...
intake after...
valve covers,coil pack brackets,and timing chain cover before...
after...
prothane motor mounts
I have an apt for a tune session with Kurt and PatrickG this coming thursday, so ill update the thread with the dyno results.
Currently already had:
Pacesetter Coated LT's
3inch Y
16'' Dynamax bullet dumped over the rear axle
Centerforce Dual Friction Cluth
Fidanza billet steel flywheel
New mods:
EPS 234/246 .601/.606 111 lsa
PowerBond U/D pulley and belts
Fast 90mm intake
Nick Williams 90mm tb
TSP 7.425 pushrods
PRC .650 valvesprings
New o2's
New set of Ngk tr55 plugs
New fuel filter
New K&N aircleaner
New Prothane Black motor mounts
Here are some pics and a vid of its idle untuned.
intake before...
intake after...
valve covers,coil pack brackets,and timing chain cover before...
after...
prothane motor mounts