DBrods Dyno #s 7xx
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I decided to put the truck on the rollers again before I start the stroker build again. This is on a 200 shot with 15* total timing. Still on a stock 6.0 shortblock with ported 243 heads and FAST 92 intake. The A/F on the motor is 12.2-12.4 and on the spray is 11.8 holding steady. The shot is still a little fat due to the higher power numbers. Keeping it safe. I didn't get a print out of the NA pull but it was 580ftlbs and 470hp. Enjoy and all comments are welcome.
Keep in mind this is through a 3200 stall and a 80E with a two piece driveshaft and 4.10 gears.
![](http://i282.photobucket.com/albums/kk272/dbrods/01b2c628.jpg)
![](http://i282.photobucket.com/albums/kk272/dbrods/d5478951.jpg)
![](http://i282.photobucket.com/albums/kk272/dbrods/59fb81d6.jpg)
Keep in mind this is through a 3200 stall and a 80E with a two piece driveshaft and 4.10 gears.
![](http://i282.photobucket.com/albums/kk272/dbrods/01b2c628.jpg)
![](http://i282.photobucket.com/albums/kk272/dbrods/d5478951.jpg)
![](http://i282.photobucket.com/albums/kk272/dbrods/59fb81d6.jpg)
![](http://i282.photobucket.com/albums/kk272/dbrods/REDSLED.jpg)
Last edited by DBRODS; 09-06-2010 at 09:22 PM.