01' SS Custom Cam & 243s = 474 rwhp / 428 rwtq *NOW w/ TRACK RESULTS*
#45
You want a gold star for pointing that out? I'm sure your not the first one to notice but you are the first to mention it. Let me swap on regular street tires and see what happens? Either that or your forgetting these are 243s not aftermarket castings so unless you have anything useful to point out then
#46
TECH Addict
iTrader: (11)
Lol - even for 465-ish it's good results. I honestly didn't notice when I first saw the graph but it probably does give an extra 5-7 based on the scaling. Like you mentioned lighter wheels/tires would probably get that back. FWIW I would be very pleased to make 465 w/ my AFR 205s and my slightly smaller cam.
Last edited by Red99TA; 02-10-2011 at 06:19 PM.
#51
Went to the track today. Made 3 passes total. First 2 passes I spun all over the track and got sideways a few times. Last and best pass was 11.79 @ 124.69 mph w/ 2.01 60ft. Nitto 555r's were bald and down to about 12psi on my last pass. Air filter was still in and I didn't powershift at all because I was just trying to make a clean pass for the day. I'm happy with the results and after deployment hopefully I'll have a 9" under it with some 4.30s or 4.56s and 28" tires.
I am having one of my buddys upload the video to youtube and then I'll post a link here.
I am having one of my buddys upload the video to youtube and then I'll post a link here.
#53
Sorry guys this is a video of a video its the best I can do without internet and trying to get a video up quickly..
http://www.youtube.com/watch?v=QMGE9uXEsJ8
And here's the timeslip
http://www.youtube.com/watch?v=QMGE9uXEsJ8
And here's the timeslip
#55
I think with a 9" rear 28" tire and 4.56s and a good bit of weight reduction I can hit high 10s depending on 60ft of course.