Etp 215 results
#22
TECH Resident
iTrader: (13)
Join Date: Apr 2002
Location: South Elgin
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Nice results. The etp 215's made 470 rwhp in stock shortblock a4 for me.
Nice product. Ran a very similar cam had like .160 int and .180 exh valve clearence. That was milled to 59cc .040 gasket and no flycut.
Nice product. Ran a very similar cam had like .160 int and .180 exh valve clearence. That was milled to 59cc .040 gasket and no flycut.
#24
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: wethersfield, ct
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
no milling.
62 cc 3.900 bore ls1 heads.
i would have loved to cc the heads to actually check the combustion chamber sizes, but i ran out of time and cash.
would have been nice to really true up the head for the claimed "62" cc chambers.
also right out the box some of the ports have different measurements in with, would of been nice to cc them to check for consiticy across each intake and exhaust port vs advertised.
fast 102 is unported with stock 90mm throttle body.
stock gm ls2 headgaskets.
62 cc 3.900 bore ls1 heads.
i would have loved to cc the heads to actually check the combustion chamber sizes, but i ran out of time and cash.
would have been nice to really true up the head for the claimed "62" cc chambers.
also right out the box some of the ports have different measurements in with, would of been nice to cc them to check for consiticy across each intake and exhaust port vs advertised.
fast 102 is unported with stock 90mm throttle body.
stock gm ls2 headgaskets.