Dyno Sheet -New Cam and DOD Delete
Thread Starter
Teching In
Joined: Jul 2011
Posts: 5
Likes: 0
From: Rutland, VT
Dyno Sheet -New Cam and DOD Delete Work was done by Mike at Rapid Motorsports and has what he calls his "old man cam" - I'm really pleased with the results. I wanted a mild setup and the car is great with the stock stall converter.
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
Thread Starter
Teching In
Joined: Jul 2011
Posts: 5
Likes: 0
From: Rutland, VT
Yes, stock heads. The drivability is great - it does push at a stop because of the higher idle.
It doesn't sound much different at idle, but you can feel it shake a bit. It would take a good ear to pick-up on the cam.
I'm backing down the tune on the trans because it is hitting harder than needed on the shifts.
Dropping the hammer at 70mph will break the rear tires loose. 55 to 120 happens so fast it surprises you. Can't wait to get a 1/4 time on it.
It doesn't sound much different at idle, but you can feel it shake a bit. It would take a good ear to pick-up on the cam.
I'm backing down the tune on the trans because it is hitting harder than needed on the shifts.
Dropping the hammer at 70mph will break the rear tires loose. 55 to 120 happens so fast it surprises you. Can't wait to get a 1/4 time on it.
Sounds great! I know my car feels totally different vs stock, so I can imagine another 70 rwhp must pull like a bastard 
Let us know how it does at the track, I can't wait to get mine up there as well.
Let us know how it does at the track, I can't wait to get mine up there as well.
Work was done by Mike at Rapid Motorsports and has what he calls his "old man cam" - I'm really pleased with the results. I wanted a mild setup and the car is great with the stock stall converter.
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
Mike was great about working with my goals of a car that wouldn't blow itself up, he listened and made great recommendations. You can't tell that he had the motor apart; the work is meticulous.
Eric
what is DOD?
Thread Starter
Teching In
Joined: Jul 2011
Posts: 5
Likes: 0
From: Rutland, VT
were you a soldier in US army that liberated Kuwait in 1991?
Trending Topics
Thread Starter
Teching In
Joined: Jul 2011
Posts: 5
Likes: 0
From: Rutland, VT
At the time, I was assigned to Task Force Freedom which was a multi-national group assigned the mission of liberating both the airport and port.
Eric
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thank you for your service and sick car dude! Gotta be awesome to have all that car haul all that *** lol.
Thread Starter
Teching In
Joined: Jul 2011
Posts: 5
Likes: 0
From: Rutland, VT
Thanks Mike - the boys are still talking about hearing your WS6 run ;-)
Thanks 2S2F, I served with a lot great people.
I have to give props to Rick at Livernois for redoing the TCM for me to soften it up with the new power.
Thanks 2S2F, I served with a lot great people.
I have to give props to Rick at Livernois for redoing the TCM for me to soften it up with the new power.
