SportGoldSS

I have a 2001 Z28 thats getting dyno tuned today, any guesses as what she puts down? mods are full bolt ons, gutted cats, mystery muffler that is not a flow master, magic stick 4 cam, professional products 85mm intake and throttle body... It is a M6 car with the stock diff.

Z28Z06

iTrader: (2)

I was going to take a shot and say 375. Let us know how you do, and I hope I am low... lol.

SportGoldSS

I hope your low too lol, made close to 340 on the same dyno before the cam and intake swap.

trey1010

iTrader: (3)

depending on the clutch i am going to say it peaks at 394rwhp.

thunderstruck507

iTrader: (18)

I'll go 405rwhp.

I wouldn't expect very much gain from the intake. Your 01 would have already had the ls6 intake.

00pewtertransam

when i did my ms4 with stock 243's, a stock gear in the rear and ls1 intake, it made 433rwhp/402rwtq. your minus the heads so i would say 410rwhp/390rwtq.

5w20

iTrader: (21)

https://ls1tech.com/forums/dyno-gues...ing-forum-150/

SportGoldSS

Didnt make anything... got some major issues that need to be worked out somehow....

ds98formula

iTrader: (3)

That sucks. What are the issues?

SportGoldSS

throttle body is only opening 90%, MAF sensor is going apeshit throwing P0101 code even after switching to a screened MAF. I have to run a vacuum leak test on it hoping thats the problem. that would also explain the fact that the car would not respond to the tuner changing the idle.

99peweterls1

iTrader: (1)

put the ls6 back on

ds98formula

iTrader: (3)

how long has the intake been on? what did the gaskets on the intake look like? are you going to try going speed density on the tune?

SportGoldSS

Intake was on two weeks. Brand new gaskets. I put the honeycombed MAF off of my other camaro on it and so far the P0101 hasnt showed back up. Also adjusted the throttle cable, you people didnt tell me its the easiest thing ever to do.

ds98formula

iTrader: (3)

You scheduled a retune yet? Hope you fixed everything