Abolsute stage II and 230/230 comp XE-R dyno results!!!!
#24
Launching!
Join Date: Nov 2001
Location: Toronto, Ontario
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
I guess it really depends on what numbers you made before the heads and cam. Every car is going to act differently towards modifications. I guess we should know in a few days
#25
TECH Enthusiast
Join Date: Dec 2001
Location: Macomb, MI
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jim Mills
I would guess 430+ also. I made 425 with that cam and stage 1 heads.
What LSA is your cam on?
Do you have any sound clips?
Thanks,
Bryan
#26
Launching!
Join Date: Nov 2001
Location: Toronto, Ontario
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Bryan,
My cam is on a 112 LSA. I do have a sound clip but it's short check out my site.
http://www3.sympatico.ca/jim_mills/images/Hawkdyno/
My cam is on a 112 LSA. I do have a sound clip but it's short check out my site.
http://www3.sympatico.ca/jim_mills/images/Hawkdyno/
#30
Launching!
Join Date: Nov 2001
Location: Toronto, Ontario
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bowtieman4life
I say 350rwhp and 350 rwtq only because you thought it was funny to sike us out.
#31
I have that same cam exept it is advanced 4 degrees. I went 7.20's with a 1.57 60ft, 3.73 gear, home ported heads and no tuning. I did some more work to the heads, shaved them, and added a 4.10 gear. Hope to get in the 6's Sat.
#32
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Hey, just wanted to wish you good luck tomorrow. Let us know how it goes. There is a track rental day next Saturday (March 27th) at Pittsburgh Raceway Park. Email me if you are interested and I wil get you the info. It is a private rental so you will be able to make a ton of runs. Me and a few others from here will be there...