243 headed 370 lq4 final dyno results
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Jul 2010
Posts: 554
Likes: 0
From: CroSSby, TexaSS
243 headed 370 lq4 final dyno results 2003 lq4 bored .030
forged eagle h beams
-4cc mahle forged pistons
ARP everything
minor ported 243's unmilled
street heat stage 2 cam
ls6 intake+ ported TB
1 3/4 pacesetter headers + ORY pipe and corsa catback
ss3600
36# injectors (unknown brand, all i know is that they're white)
SLP maf with resistor removed (previous owner bought it)
At first I thought the numbers were low, but I went to the track and made this on my first pass
currently on the to do list
Strange SA shocks
S60 with 3.42's or 3.73's
Hoosier Slicks
What else should I do for more power? I've already spoken with someone and have an idea on what I need to do but i would like to see what everyone thinks my next step should be. I'd like to see low 11's before i go to nitrous
Props To Martin@tick for the cam help, the TQ curve is flatter than a pancake! The Stall gets right in the meat of it.
forged eagle h beams
-4cc mahle forged pistons
ARP everything
minor ported 243's unmilled
street heat stage 2 cam
ls6 intake+ ported TB
1 3/4 pacesetter headers + ORY pipe and corsa catback
ss3600
36# injectors (unknown brand, all i know is that they're white)
SLP maf with resistor removed (previous owner bought it)
At first I thought the numbers were low, but I went to the track and made this on my first pass
currently on the to do list
Strange SA shocks
S60 with 3.42's or 3.73's
Hoosier Slicks
What else should I do for more power? I've already spoken with someone and have an idea on what I need to do but i would like to see what everyone thinks my next step should be. I'd like to see low 11's before i go to nitrous
Props To Martin@tick for the cam help, the TQ curve is flatter than a pancake! The Stall gets right in the meat of it.
Last edited by greenvortec97; Nov 1, 2012 at 08:31 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Jul 2010
Posts: 554
Likes: 0
From: CroSSby, TexaSS
we threw 3 more degrees of spark advance and raised the shift point for 1>2 from 6100 to 6500 and 2>3 from 6300 to 6500, gonna see how it does like this for now.. results tomorrow with a vcm scan as well
Joined: Jul 2007
Posts: 1,500
Likes: 177
From: ELSA, South TEXAS (956) 802-7700
2003 lq4 bored .030
forged eagle h beams
-4cc mahle forged pistons
ARP everything
minor ported 243's unmilled
street heat stage 2 cam
ls6 intake+ ported TB
1 3/4 pacesetter headers + ORY pipe and corsa catback
ss3600
36# injectors (unknown brand, all i know is that they're white)
SLP maf with resistor removed (previous owner bought it)
At first I thought the numbers were low, but I went to the track and made this on my first pass
currently on the to do list
Strange SA shocks
S60 with 3.42's or 3.73's
Hoosier Slicks
What else should I do for more power? I've already spoken with someone and have an idea on what I need to do but i would like to see what everyone thinks my next step should be. I'd like to see low 11's before i go to nitrous
Props To Martin@tick for the cam help, the TQ curve is flatter than a pancake! The Stall gets right in the meat of it.
forged eagle h beams
-4cc mahle forged pistons
ARP everything
minor ported 243's unmilled
street heat stage 2 cam
ls6 intake+ ported TB
1 3/4 pacesetter headers + ORY pipe and corsa catback
ss3600
36# injectors (unknown brand, all i know is that they're white)
SLP maf with resistor removed (previous owner bought it)
At first I thought the numbers were low, but I went to the track and made this on my first pass
currently on the to do list
Strange SA shocks
S60 with 3.42's or 3.73's
Hoosier Slicks
What else should I do for more power? I've already spoken with someone and have an idea on what I need to do but i would like to see what everyone thinks my next step should be. I'd like to see low 11's before i go to nitrous
Props To Martin@tick for the cam help, the TQ curve is flatter than a pancake! The Stall gets right in the meat of it.
They should dub that cam the "A Cup Cam" because that bad boy stays flat forever. Another thing why did you guys stop pulling at 6500 the power didn't even start to drop I bet it would pull to 7000 with no problem assuming good springs of course.
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Jul 2010
Posts: 554
Likes: 0
From: CroSSby, TexaSS
just got back from the track, i added a datalog from the first pass
the first three on the left are from last week, the three on the right are tonight's
the last slip on the right was my first pass, after that, the PCM started to pull timing as the IAT count went up (-2* IIRC). Tranny got hot as well on the last pass to 220f
(i hot lapped all these runs) but all in all, the first pass vs my 11.76 pass showed i gained 2 mph and dropped .3 off my time with a 1.70 60ft.
the first three on the left are from last week, the three on the right are tonight's
the last slip on the right was my first pass, after that, the PCM started to pull timing as the IAT count went up (-2* IIRC). Tranny got hot as well on the last pass to 220f
(i hot lapped all these runs) but all in all, the first pass vs my 11.76 pass showed i gained 2 mph and dropped .3 off my time with a 1.70 60ft. 
Gear wont help much, 3.90 might, 3.73 is a waste. 4.10 with a 275/60 drag radial would be the right combo.
Buy some double adjustable rear shocks.
Put a cutout on it.
Tweak with those mods and it will run some 11.40-11.30's
Buy some double adjustable rear shocks.
Put a cutout on it.
Tweak with those mods and it will run some 11.40-11.30's
Thread Starter
TECH Enthusiast
iTrader: (1)
Joined: Jul 2010
Posts: 554
Likes: 0
From: CroSSby, TexaSS
and believe me, i wanna ditch the maf. The maf was giving me problems when the car was an ls1, the previous owner had it tuned by a moron in houston who tunes without a wideband and thinks "he knows what cars want by smell and hearing"
Turn It to 6800-7000 rpms and you will et quicker. Especially important with only 3.23 gears so it don't drop back so low in the power band on shifts .
Good pass's , my lq4 in a 6 spd car with 4.10 gears shifting at 7000 with f14 cam 232/234 112lsa +4 and run 11.32@122.
Point is, run the rpms up some.
These lq4's are tough .
Good pass's , my lq4 in a 6 spd car with 4.10 gears shifting at 7000 with f14 cam 232/234 112lsa +4 and run 11.32@122.
Point is, run the rpms up some.
These lq4's are tough .