Lt1Son

iTrader: (2)

Well finally had my car dyno-tuned by copolla motorsports in Malta Ny. Great Customer Service. Answered all my ?'s and then some.

94 Lt1 355 6" rods 11:1 Comp CC503 Cam
Mild Ported Heads 2.0 1.56 Valves
1.6rr's
58mm TB/Ported Intake
LongTubes/Ory/CME Borla
Elec Water Pump
30lb Injectors
12 Bolt 4:11 gear 6spd

I was hoping for 365/380 ended up with 353/369 i feel its on the low side ive seen cam only bolt on 503 cars around where i am. But its only a number, see how she runs at the track!!!! He said his dyno is about 5-10% lower than others because hes re-dynoed other cars with lower numbers. But overall im very pleased. cant wait to drive car. Opinions would be great thanks!

zlicious94

iTrader: (1)

Not sure why you chose that cam

TravisMcGill2000

iTrader: (2)

Pretty decent numbers. I wouldnt went little bigger cam and more compression since you got built bottem end. Now take it to the track.

Lt1Son

iTrader: (2)

Well i wanted to do an afr topend... but i spent my $$ in the lower and was really impatient. i got the heads from a friend for a good deal they came off a golen 383. But they were really mild port work--and as far as cam same thing got a steal on that.A buddy of mine had it in his car and it seemed to like the bottle. So as long as i can hit low 12's motor and 11's bottle ill be happy. its pretty much a dd car with ac and ps..But next time def wont be so impatient. Thanks for comments

TravisMcGill2000

iTrader: (2)

As long as it hooks it should go 11s na and 10s on spray. I ran 12.3s with 273rwhp.

Lt1Son

iTrader: (2)

wow thats awesome! What was your 60' time and how light was your car? 11's would be very nice.

TravisMcGill2000

iTrader: (2)

1.58 60ft 3380 raceweight. Just get ur 60ft down and you should be good.