Stock vs Granatelli wires
08-21-2013, 08:44 AM
#21
TECH Apprentice
iTrader: (6)
Join Date: Apr 2005
Location: Savannah, GA
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
I just installed some on the hi-temp wires on my car. They are very high quality and the warranty you can not beat. I did measure the ohms from my msds to these and saw the difference. Not sure if they add horsepower i have not dynoed again. But on looks, quality and warranty, they are worth every penny.
08-21-2013, 11:28 PM
#22
So I posted dyno graphs of the difference i saw with the 28-1545ht's and they definately made the 20rwhp. But I have 2 complaints.
First they are noisy. They do interfear with some electronics in my vehicle.
Secondly, the red fabric mesh has come out of 4 of the heat shrink boots up at the top near the coil boot.
First they are noisy. They do interfear with some electronics in my vehicle.
Secondly, the red fabric mesh has come out of 4 of the heat shrink boots up at the top near the coil boot.
08-23-2013, 12:27 PM
#24
So I posted dyno graphs of the difference i saw with the 28-1545ht's and they definately made the 20rwhp. But I have 2 complaints.
First they are noisy. They do interfear with some electronics in my vehicle.
Secondly, the red fabric mesh has come out of 4 of the heat shrink boots up at the top near the coil boot.
First they are noisy. They do interfear with some electronics in my vehicle.
Secondly, the red fabric mesh has come out of 4 of the heat shrink boots up at the top near the coil boot.
Last edited by granatelli sales; 01-02-2014 at 11:47 AM.
08-25-2013, 04:16 PM
#28
It is specifically with my USB mouse for my laptop when using HPtuners. Vehicle off, mouse work great, engine running, mouse stays put. Shut the truck off and the mouse works again. This became an issue on the dyno literally right after I swap wires.
It is not a huge issue, but I thought I would mention it.i tend to start my log now with key on before I fire the truck. But I can't switch screens after that. I have been using my other laptop now instead with out issue.
It is not a huge issue, but I thought I would mention it.i tend to start my log now with key on before I fire the truck. But I can't switch screens after that. I have been using my other laptop now instead with out issue.
08-26-2013, 06:48 PM
#29
It is specifically with my USB mouse for my laptop when using HPtuners. Vehicle off, mouse work great, engine running, mouse stays put. Shut the truck off and the mouse works again. This became an issue on the dyno literally right after I swap wires.
It is not a huge issue, but I thought I would mention it.i tend to start my log now with key on before I fire the truck. But I can't switch screens after that. I have been using my other laptop now instead with out issue.
It is not a huge issue, but I thought I would mention it.i tend to start my log now with key on before I fire the truck. But I can't switch screens after that. I have been using my other laptop now instead with out issue.
We have never had that problem just send back the wires and we will send you a new set
08-28-2013, 09:52 AM
#34
TECH Apprentice
iTrader: (6)
Join Date: Apr 2005
Location: Savannah, GA
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
I have not had this issue at all. These things are amazing. i have had MSD's, Delco's, Taylor's and none come close. I hope i don't have the same problem as the other guy with them coming apart but if they do Lifetime Warranty is all i can say. I have been driving my car a lot lately and no issues with electronics.
08-30-2013, 11:15 AM
#38
When you go to www.granatellimotorsports.com add any anything to the cart and you will see that the price will drop because we are having a special in most of out parts for the summer and the wires are one of the parts
