quik01ss

iTrader: (24)

-403ci (11.92cr) eagle crank/rods/weisco pistons (build by friend and I)
-AFR 225 big bore heads (unported only cut to 59cc)
-Thunder racing stroker cam 247/251. 112
-Meziere ewp
-Vengeance racing ported fast 102 with NW 102tb
-ARH 1⅞ headers
-Kooks true dual exhaust threw cme tip
-FTP 104mm lid (SD tune)
-GZ lsx vacuum pump
-SLP under drive pulley

-T56/textrilla twin disk
-Dana 60 410 gears
-10spoke wheels

93 octane no additives straight pump gas.

Before vac pump 529/487 dynojet224(sae)
After with vac pump 559/508 dynojet224(sae)

INIT2WIN

iTrader: (8)

Thats some awesome power!!! Must be a blast to drive with the M6 and the 4.10s!!! Do you have any idle clips of the car with the TDs and the CME?

jdub38672

iTrader: (4)

Nice number I hope I'm somewhere near those on my build. I got an eagle crank and rods as well

quik01ss

iTrader: (24)

I will soon friend took video of pulls

Jdub ....what u sit there n polish that thing? Damn

Baconz28

Man that's stout. It's some 427 inch motors that don't put that down. Is this a pump gas car?

quik01ss

iTrader: (24)

Yes sir 93 Oct nothing added just straight pump gas

DietCoke

iTrader: (18)

I also found 30hp with the vac pump. Well worth its cost.

Blackbird-WS6

iTrader: (15)

Think im going with a vacuum pump on my next build.

Can you run ac with a vacuum pump??

Baconz28

When you get done with the build bro I want to hear the monster. I love the kooks exhaust (that's pimping)

adamantium

iTrader: (3)

Holy ******* **** i guess that vacuum pump was worth it!

How much was it?

quik01ss

iTrader: (24)

Video posted in op

00transamws6

iTrader: (4)

WOW awesome power. Thats a great build.

quik01ss

iTrader: (24)

i think $875 shipped if i remember correctly

Nostang

iTrader: (4)

Did you gap the rings differently for the vacuum pump? Great numbers.

quik01ss

iTrader: (24)

If I knew I was putting a pump I would've ran gap less rings but right now they're gapped for a mild shot of nitrous

Bill00Formula

iTrader: (4)

Wow! Are you going to have before and after track data for the vacuum pump? The after is quite a bit more than my 427 w/ tfs 235 heads makes. I might have to look into this.

quik01ss

iTrader: (24)

At 520 HP I went 11.2@128 but haven't been to the track since that run about 3 years ago .....I'm more of a roll racer then the track

stumprrp

iTrader: (2)

cage dana 60 full suspension and drag radials to roll race, cmon Joe!!!!!!

Baconz28

Wow!! 128 mph tells me that the car is really a mid 10 sec car!!

quik01ss

iTrader: (24)

If it can hook that 128mph was when I first had the 403 in the car (fast 92 smoothed runners/4inch cut out on y pipe) also being the car weighing around 3765 with me in it (iron 6.0/cage/Dana)