FMS F13 cam-only dyno results
#21
On The Tree
iTrader: (6)
Join Date: Oct 2002
Location: Lufkin, Texas
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
What was the air fuel and where was your timing at? The dyno is mainly for tuning purposes. Run the car at the track and go from there. By the way where did everyone get that the humidity was only 10% here in Texas, it is always high here. Today for example it was 93% humidity and today has been one of our cooler days.
#25
11 Second Club
iTrader: (20)
Join Date: Jul 2002
Location: Jonesboro, Ga
Posts: 1,988
Likes: 0
Received 0 Likes
on
0 Posts
I would run it at the track, or dyno at another location. If its definately low I have to agree with gomer in the plugs/wires/fuel filter/air filter, etc. route. I myself struggled with a low dyno with my old cam only making 355rwhp with a 224. It turned out to be a combination of things from tuning to vacuum leaks to exhaust restriction.
Good Luck,
Josh
Good Luck,
Josh
#26
TECH Junkie
Join Date: Aug 2002
Location: Fort Collins, CO
Posts: 3,726
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Country Boy
You have to remember... in Florida, 80+% humidity is the norm here. Its VERY rare to see <80%, plus its summer here. If we had the 10% that Texas has, then we would dyno some badass numbers
#27
TECH Enthusiast
iTrader: (11)
Join Date: Oct 2002
Location: Catonsville, MD
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
With the FM4 cam and completely stock heads I put down 390rwhp and 372rwtq untuned. It was high 90's with a puttload of humidity at the time and that was thru LT's, oryp, and SLP LM. Other mods included plugs/wires/lid. I think the only bolt on mod I don't have is the ASP pulley. In cooler weather with a cutout I'm sure I'd be seeing at least 400rwhp N/A. With the cutout open I'm trapping 115mph N/A.
On the 100 dry shot it put down 452rwtq and 472rwtq on the same day of the dyno.
On the 100 dry shot it put down 452rwtq and 472rwtq on the same day of the dyno.
#28
TECH Regular
Thread Starter
Join Date: Oct 2003
Location: Miami, FL
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PizzOnFord
With the FM4 cam and completely stock heads I put down 390rwhp and 372rwtq untuned. It was high 90's with a puttload of humidity at the time and that was thru LT's, oryp, and SLP LM. Other mods included plugs/wires/lid. I think the only bolt on mod I don't have is the ASP pulley. In cooler weather with a cutout I'm sure I'd be seeing at least 400rwhp N/A. With the cutout open I'm trapping 115mph N/A.
On the 100 dry shot it put down 452rwtq and 472rwtq on the same day of the dyno.
On the 100 dry shot it put down 452rwtq and 472rwtq on the same day of the dyno.