388 finally hits the dyno
#164
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
We've tried our best to hide it from you
#167
TECH Fanatic
iTrader: (55)
Cause no one in South Florida knows what they're doing when it comes to N/A LS stuff, so taking anyones advice here is retarded. I know 1 guy who does and he had a 4xxci GTO that went 135+mph N.A and he isn't even an LS guy.
Put a single plane manifold, a head that flows big #'s at high lift, a cam that you can spin, redesign your drive train with the minimization of parasitic loss in mind. All that "under the curve power" ls1tech loves so much is Bullshit does not work on the track.
What OP is doing is nothing different then others have done, there are a couple other guys who have gone 130+ mph with cam only 6 liter stuff.
Put a single plane manifold, a head that flows big #'s at high lift, a cam that you can spin, redesign your drive train with the minimization of parasitic loss in mind. All that "under the curve power" ls1tech loves so much is Bullshit does not work on the track.
What OP is doing is nothing different then others have done, there are a couple other guys who have gone 130+ mph with cam only 6 liter stuff.
DAMIEN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Give me
#169
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
probably the radiator? given the location of that big air plenum, it's a guess?
#171
"I MAID THEESE"
iTrader: (3)
My car only dynoed 480 rwhp, 3600 lbs , 6 speed car. and I run very close to what Big Hammer is running. But I trap 5 mph less in the 1/4. almost the same in the 1/8th I think... I need to find a slip.
EDIT:
103 MPH 1/8th 129.8 1/4.
EDIT:
103 MPH 1/8th 129.8 1/4.
Last edited by Mavn; 07-26-2017 at 01:43 PM.
#172
10 Second Club
Thread Starter
Put a real top end on all that CI and you should beat me
#176
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
You got VERY similar numbers to me. i'm at 519 and 35xx pounds, though. You did better with less. I had 102 in the 1/8, but 10.7xx at 129.xx.
#178
TECH Addict
The added bonus of the cage is it helps extend the life of the chassis a lot. Non caged big torque cars tend to fatigue all the seams in the unibody. Road race track days the average sedan is good < 2 years if you run it a dozen or so days per season, its not that it will fail, it just gets soft..
#179
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
http://www.lsxmag.com/news/displaced...8-ci-trans-am/
Saw this. Looks kinda familiar...
Congratulations man! kinda cool to see a LS1Tech guy get noticed in LSXMag!
Saw this. Looks kinda familiar...
Congratulations man! kinda cool to see a LS1Tech guy get noticed in LSXMag!
#180
TECH Senior Member
http://www.lsxmag.com/news/displaced...8-ci-trans-am/
Saw this. Looks kinda familiar...
Congratulations man! kinda cool to see a LS1Tech guy get noticed in LSXMag!
Saw this. Looks kinda familiar...
Congratulations man! kinda cool to see a LS1Tech guy get noticed in LSXMag!