Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

388” ls3 hits the rollers with a new Cam! *hp\L*

Thread Tools
 
Search this Thread
 
Old 03-30-2018 | 03:08 PM
  #21  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by G Atsma
Okay, just for clarification, is this a Donkey Dick cam or a Horse **** cam?? Inquiring minds gotta know....
It is a stage 2 Horse ****!
Old 03-30-2018 | 03:09 PM
  #22  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by NHRAFORMULA00
What heads,compression,ect,??????
Mast medium bore ls3’s, 12:1 comp
Old 03-30-2018 | 03:12 PM
  #23  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by blk00ss
Lord. If you can learn to drive you might go a 6.30. MIGHT.
I’m not gonna learn to drive by going to an auto swap :p
Old 03-30-2018 | 03:13 PM
  #24  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by CyberGrey Z28
Legend has it, Hammer's car runs strictly on boosted 5.bro tears


When is it hitting the track again and what mph are you shooting for?
Sometime in summer. Should be high 130’s.. would love to crack 140. At these speeds it takes a fair bit of power to gain a MPH
Old 03-30-2018 | 03:14 PM
  #25  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by sxc Z28
Damn Hammer! 800+ crank and not even 400cubes.
I’m not convinced it’s 800 crank. My drivetrain loss would be less than most people’s
Old 03-30-2018 | 03:15 PM
  #26  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by islander033
Nice work Hammer!
Originally Posted by R6cowboy
Good job hammer
Thanks guys!
Old 03-30-2018 | 03:16 PM
  #27  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by speedtigger
This car continues to impress! The FAST mid-length and the Cam Motion LLR are like peanut butter and jelly!
Thanks big guy! Yeah the fast mid runner is the cats *** for a proper ls3
Old 03-30-2018 | 03:17 PM
  #28  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by Darth_V8r
Agreed! This is one of the best builds I've seen on here. Serious power but still pretty much a street car. Curious what other plans you got. At some point the motor stronger than the chassis. And you're probably past that point.

And yes LLSR ftw. Like bringing a gun to a knife fight.
Getting a bar put in so I can run it at the track. Also have a nitrous plate to put in it at some point
Old 03-30-2018 | 03:23 PM
  #29  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by NAVYBLUE210
What blows me away even more is the street ability of
32* Overlap + Mid Length Runners + Light Clutch/Flywheel
being tuned with the 99-02 PCM.

Mad Tuning Skillz there!
Very few supposed "Pro Tuners" have ability or willingness
to tune such a combo!
I had\have a great tuning mentor who doesn’t like to give up lol. He still helps me out.

There’s still some bucking down low but working on it. I don’t mind the Cam. Others wouldn’t like it. But man it screams up top and just doesn’t back down!

We found when Street tuning it that it was maxing out dynamic airflow... so we had to scale the tune 25% before it would stop maxing out! So we were speculating on the HP based on the dynamic airflow and injector percentage... we were kinda blown away by what the calculations were coming out to but then the Dyno basically came in right at the same numbers...

Also wondering if the ECU is hard coded to limit to 8000. It still hits the limiter there even when set at 8300. But there’s a drivetrain abuse table that you can’t set over 8000 so I’m wondering if that’s what’s doing it
Old 03-30-2018 | 03:33 PM
  #30  
spanks13's Avatar
TECH Fanatic
15 Year Member
iTrader: (5)
 
Joined: Oct 2008
Posts: 1,295
Likes: 515
Default

Should get some of those magic coil packs and some super quad spark nuclear iridium spark plugs and pick up another 30 horsepower.

Awesome power. This cam is clearly much better matched to the rest of the package. Your first cam was comically small for the amount of power and revs you got out of this thing.
Old 03-30-2018 | 03:55 PM
  #31  
blk00ss's Avatar
TECH Addict
iTrader: (66)
 
Joined: Feb 2007
Posts: 2,366
Likes: 5
From: Jasper, AL
Default

Originally Posted by big hammer
I’m not gonna learn to drive by going to an auto swap :p
Old 03-30-2018 | 04:14 PM
  #32  
munciegoat's Avatar
Staging Lane

 
Joined: Jan 2011
Posts: 84
Likes: 5
From: Muncie.IN
Default

Hammer showing the world what a real N/A LS can do!
Old 03-30-2018 | 05:31 PM
  #33  
topspeed1's Avatar
TECH Apprentice
5 Year Member
iTrader: (2)
 
Joined: Apr 2017
Posts: 305
Likes: 9
From: Washington NC
Default

Awesome numbers
Old 03-30-2018 | 05:50 PM
  #34  
CyberGrey Z28's Avatar
TECH Apprentice
iTrader: (4)
 
Joined: Oct 2009
Posts: 337
Likes: 2
Default

Any dyno vids? Want to share it with some local nay sayers.
Old 03-30-2018 | 06:31 PM
  #35  
jhshnh's Avatar
TECH Resident
10 Year Member
 
Joined: Oct 2014
Posts: 885
Likes: 60
Default

I thought it was a 3/4 race cam! Seriously, this is definitely one of the best builds I've seen in here. Hard work and smart research pays off!
Old 03-30-2018 | 07:54 PM
  #36  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by munciegoat
Hammer showing the world what a real N/A LS can do!
Originally Posted by topspeed1
Awesome numbers
Originally Posted by jhshnh
I thought it was a 3/4 race cam! Seriously, this is definitely one of the best builds I've seen in here. Hard work and smart research pays off!
Thanks guys! There’s a lot of work and late night googling involved to make those numbers lol. Now to figure out how to use it
Old 03-30-2018 | 07:55 PM
  #37  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by spanks13
Should get some of those magic coil packs and some super quad spark nuclear iridium spark plugs and pick up another 30 horsepower.

Awesome power. This cam is clearly much better matched to the rest of the package. Your first cam was comically small for the amount of power and revs you got out of this thing.
Yeah the first Cam was specd for a Stock bottom end ls3. This one is better matched for sure
Old 03-30-2018 | 07:55 PM
  #38  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Originally Posted by CyberGrey Z28
Any dyno vids? Want to share it with some local nay sayers.
I’m trying to load a vid to you tube but it keeps glitching
Old 03-30-2018 | 08:24 PM
  #39  
big hammer's Avatar
Thread Starter
10 Second Club
15 Year Member
 
Joined: May 2009
Posts: 3,427
Likes: 191
From: over dere
Default

Had to reboot my phone

The following users liked this post:
Bspeck82 (08-06-2022)
Old 03-30-2018 | 09:43 PM
  #40  
Che70velle's Avatar
ModSquad
10 Year Member
iTrader: (6)
 
Joined: Jan 2012
Posts: 6,717
Likes: 3,795
From: Dawsonville Ga.
Default

Hammer, this is serious power bro. Well done for sure!
Have you posted cam specs? Maybe I missed them?


Quick Reply: 388” ls3 hits the rollers with a new Cam! *hp\L*



All times are GMT -5. The time now is 05:29 AM.