441 rwhp
08-12-2018, 08:28 PM
#1
441 rwhp 99 ls1 with ls6 Intake 1 3/4" headers dynatech LT, 706 PRC stage 2.5 heads, BTR stage 4 camshaft, Ypipe 3", 42 lb injectors, 93 octane. Ended up at 27* up top, 25-26* midrange/tq. Lambda was .89. T56 4th gear pull
08-13-2018, 09:58 AM
#5
TECH Senior Member
Join Date: Jun 2016
Location: Central Cal.
Posts: 6,224
Thanks! I'm not fluent in Mavn either....
08-13-2018, 10:05 AM
#8
TECH Senior Member
Join Date: Jun 2016
Location: Central Cal.
Posts: 6,224
Originally Posted by Mavn 
Cesar Is the A+ Tuner. LMFAO!
08-13-2018, 02:21 PM
#10
TECH Apprentice
Join Date: Sep 2008
Location: Houston
Posts: 307
Subone, I presume you are in the Houston area?
08-13-2018, 02:51 PM
#12
On The Tree
Join Date: Feb 2013
Posts: 107
Nice fricking numbers, so your motor is making about 480-500hp?
Think its a 13% loss with a 4th gen M6.
Think its a 13% loss with a 4th gen M6.
08-13-2018, 05:41 PM
#16
10 Second Club
Join Date: May 2009
Location: over dere
Posts: 2,745
Originally Posted by G Atsma
Thanks! I'm not fluent in Mavn either....
08-13-2018, 06:07 PM
#17
TECH Senior Member
Join Date: Jun 2016
Location: Central Cal.
Posts: 6,224
Originally Posted by big hammer
issa a cross between hillbilly and Ebonics
08-13-2018, 06:56 PM
#18
It drove good no bucking or low speed surge. It's a pretty common setup I know it well. Not sure how much it's making to the flywheel as I dont think drivetrain losses are based on %, it's usually a fixed number plus some % after certain fluid temp changes.
