New mods and results for Detoxx with the D1X - LS1TECH - Camaro and Firebird Forum Discussion

Notices
Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

New mods and results for Detoxx with the D1X

Old 11-15-2018, 04:18 PM
  #1  
10 Second Club
Thread Starter
iTrader: (14)
 
Detoxx03's Avatar
 
Join Date: Jan 2007
Location: Woodward Avenue
Posts: 7,230
Exclamation New mods and results for Detoxx with the D1X

Recently had a few things done to the car in preparation for a half mile event back in September. With that being the plan I had the car shipped down to Futral Motorsports for the mods I wanted to do. The original plan was just to swap to ARH 2 long tubes, ProCharger race IC, change my 5th and 6th gear trans ratios to ZR1 ratios, and have it tuned on Ignite red 114. Well things changed once RPM opened up my transmission. So the new mods are as follows:


ProCharger Race IC
ARH 2Ē headers
ID1700Xís
Mighty Mouse race can
Holley LS valve covers
RPM level VI trans w/ ZR1 5th and 6th gear ratios

So previous numbers for the car were 932/755 on 19psi and ethanol content was 73%.

Baseline pull before the mods were done it did 928/763. Remember this was Sept in Louisiana so shop temps were in the 100ís vs 80ís when the previous high was put down.

After mods it did 938/770 on the pump e85.

949/776 by just pouring in some ignite red 114.

953/776 by adding 1 degree.

972/792 after a few more tweaks.

After completion it did 980/797 on 21.5psi and 83% ethanol content.

Total timing at 17* btw. We could do more but itís still SBE and we are already pushing it like crazy.
Iím sure with timing in the 19-21 with that badass fuel it would easily be in the 1000ís but Iím happy where itís at.

Not only was I stoked with the new numbers but once I drove it to feel how amazing the trans felt. I never had major trans issues previously except for the occasional lockout of 3rd on a hard shift. After the upgrades RPM did however I wish I would have upgraded it years ago. Drives and shifts so smooth.

The new power is awesome and the increase in midrange feels amazing. Not bad for a little ole D1X headunit.

I swapped injectors for future upgrade purposes. I donít see myself going to a bigger blower but I do have a smaller pulley for this one that will come in handy if I ever need it.

I love the new catch can setup. I previously had a monster RX can. It did its job but it didnít fit in the engine bay so I had it mounted by the radiator cradle. I like this the MM setup mounts and its functionality. Not to mentions Daveís customer service.

Headers for great and even give it a different tone. Nothing crazy but I notice it.

Forgot to mention the increase in psi was from a new air filter. Not pulley swaps or anything funny just a brand new clean filter. Old one lost boost. We cleaned it and it picked back up where it used to be and then when the new one was put on it gained boost.

Last but not least the intercooler. Itís a big one but it does itís job. Dropped iatís from 112 at the end of the pull previously and now itís at 99.

All in all Iím very happy with this car and setup. Always have been. I try to keep it as simple as possible. Itís winter now so Iíll go grab some 1/4 mile traps in the spring and try the half mileís again as well since we didnít get to run that day. Other than that it performs great on the street when I run people. The LS3 is still going strong.

This wasnít meant to be this long but I tried to share as much info as possible.











Detoxx03 is offline  
Old 11-16-2018, 08:53 AM
  #2  
TECH Enthusiast
iTrader: (1)
 
Chris25's Avatar
 
Join Date: Sep 2013
Location: Clearwater, FL
Posts: 615
Default

Killer numbers OP that thing has to be a monster on the street.
Chris25 is offline  
Old 11-16-2018, 09:15 PM
  #3  
11 Second Club
 
sxc Z28's Avatar
 
Join Date: Aug 2016
Location: Indiana
Posts: 312
Default

Nice gains across the entire curve man. Always a fan of your ride.
sxc Z28 is online now  
Old 11-19-2018, 05:05 PM
  #4  
10 Second Club
Thread Starter
iTrader: (14)
 
Detoxx03's Avatar
 
Join Date: Jan 2007
Location: Woodward Avenue
Posts: 7,230
Default

Thanks guys. Yes it’s a blast to drive.
Detoxx03 is offline  
Old 11-19-2018, 11:44 PM
  #5  
TECH Senior Member
iTrader: (26)
 
kinglt-1's Avatar
 
Join Date: Jul 2005
Location: Ft. Wayne, IN
Posts: 5,549
Default

Simply Awesome...I have always been a fan of your Vette.
kinglt-1 is offline  
Old 11-21-2018, 10:49 PM
  #6  
10 Second Club
Thread Starter
iTrader: (14)
 
Detoxx03's Avatar
 
Join Date: Jan 2007
Location: Woodward Avenue
Posts: 7,230
Default

Appreciate that
Detoxx03 is offline  
Old 11-21-2018, 10:53 PM
  #7  
10 Second Club
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,070
Default

That’s a bad **** MFer
big hammer is offline  
Old 11-25-2018, 11:02 AM
  #8  
On The Tree
iTrader: (4)
 
Join Date: Mar 2004
Location: Jupiter FLorida
Posts: 133
Default

Honest question, why not go with a bigger blower at lower boost to achieve the same numbers? Wouldnt it be easier on the blower/engine? I have a f1a and am new to the blower game, if i knew i could make those numbers with a d1x i might have gone that route.
Ls1Rx-7 is offline  
Old 11-26-2018, 09:22 AM
  #9  
10 Second Club
iTrader: (7)
 
HioSSilver's Avatar
 
Join Date: Aug 2002
Location: Winchester, VA
Posts: 4,808
Default

That thing should pull like a **** with a tq curve like that.
HioSSilver is offline  
Old 11-26-2018, 01:29 PM
  #10  
10 Second Club
 
big hammer's Avatar
 
Join Date: May 2009
Location: over dere
Posts: 3,070
Default

Ls3 motors is this nations backbone
big hammer is offline  
Old 11-26-2018, 04:59 PM
  #11  
TECH Fanatic
iTrader: (7)
 
Join Date: Apr 2013
Location: S.A., TX
Posts: 1,733
Default

Wrapped headers.
KW Baraka is offline  
Old 11-26-2018, 05:10 PM
  #12  
TECH Senior Member
 
Join Date: Jun 2016
Location: Central Cal.
Posts: 8,662
Default

Originally Posted by KW Baraka View Post
Wrapped headers.
History within a year or two....
G Atsma is offline  


Thread Tools
Search this Thread

About Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: