PRC 225 cam and PRC stage 2.5 5.3 heads
08-27-2004, 10:32 AM
#21
TECH Fanatic
Join Date: Nov 2003
Location: The point of no return...
Posts: 1,380
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CamaroCain
OMG, you are actually going to the track and plan to compete at the Thunder Shootout?? It will be nice to see some track times from your car instead of just high dyno numbers 
This car hauls serious ***!! I went for a ride and I was like
08-27-2004, 11:22 AM
#22
Magic Stick + PRC heads 
If it does anything like the a4 car that just finished doing 424rwhp unlocke then it will probably fly!!!
If it does anything like the a4 car that just finished doing 424rwhp unlocke then it will probably fly!!!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
08-29-2004, 03:19 PM
#26
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by apexman
I am also impressed with the amount of Tq. you have. Are they selling a heads and cam package? I may be interested!
Derek
Derek
btw, I didn't get to run the car at the track friday night.. www.huntsvilledragway.com was having a racer's appreciation series bracket race friday night instead of their normal test and tune, so I couldn't run. I'll be going to steele tuesday night and will report back.
08-29-2004, 07:08 PM
#28
10 Second Club
iTrader: (5)
Join Date: Apr 2003
Location: Okinawa, Japan
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomer
You can get the heads and cam package thru racetech speed ----> which is a sponsor on the board.
btw, I didn't get to run the car at the track friday night.. www.huntsvilledragway.com was having a racer's appreciation series bracket race friday night instead of their normal test and tune, so I couldn't run. I'll be going to steele tuesday night and will report back.
btw, I didn't get to run the car at the track friday night.. www.huntsvilledragway.com was having a racer's appreciation series bracket race friday night instead of their normal test and tune, so I couldn't run. I'll be going to steele tuesday night and will report back.
08-31-2004, 11:09 PM
#29
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kurtomac
youll run a stout number there.....VERY fast track
https://ls1tech.com/forums/drag-racing-results/211034-first-time-track-new-12bolt.html
09-14-2004, 10:35 PM
#32
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Woo hooo.. another new best tonight on the combo's second trip to the track. I only had one clean run and the track prep sucked, but it was good enough. Last trip to the track it ran a 1.63 60ft time, wish I could have pulled one of those off tonight, but the test n tune track prep wasn't going to get it. Check the Drag Results section for a full run down of tonights events..
1.71 60ft
7.35 @ 95.3mph
11.39 @ 122.8mph!!
Pretty good for a baby cam on a non hooking track!!
1.71 60ft
7.35 @ 95.3mph
11.39 @ 122.8mph!!
Pretty good for a baby cam on a non hooking track!!
. excellent trap speed, shows the power of your combo. 
09-15-2004, 10:04 AM
#35
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1fastWS6
What tune are you running now? Can you post some info on timing, A/F, shift points that you're running?
09-15-2004, 10:08 AM
#36
Originally Posted by gomer
Timing is 30* from 2500rpm to 4500rpm and then 28-29 from there up. A/F is about 13.2 to 13.5 across the board on the dyno. My shiftlight is set to 6300, but I'm shifting well after the light, so I'm guessing 6500 or so.
09-15-2004, 11:08 AM
#37
On The Tree
Join Date: Feb 2003
Location: Birmingham, AL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomer
Woo hooo.. another new best tonight on the combo's second trip to the track. I only had one clean run and the track prep sucked, but it was good enough. Last trip to the track it ran a 1.63 60ft time, wish I could have pulled one of those off tonight, but the test n tune track prep wasn't going to get it. Check the Drag Results section for a full run down of tonights events..
1.71 60ft
7.35 @ 95.3mph
11.39 @ 122.8mph!!
Pretty good for a baby cam on a non hooking track!!
1.71 60ft
7.35 @ 95.3mph
11.39 @ 122.8mph!!
Pretty good for a baby cam on a non hooking track!!
When are you going to put the MS3 in there? And my clutch STILL chatters 
09-15-2004, 11:21 AM
#38
11 Second Club
Thread Starter
iTrader: (13)
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by m_donze
VERY nice When are you going to put the MS3 in there? And my clutch STILL chatters
When are you going to put the MS3 in there? And my clutch STILL chatters 
That will help it alot.
09-15-2004, 11:25 AM
#39
On The Tree
Join Date: Feb 2003
Location: Birmingham, AL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomer
Find a deserted road and do about 10 or 15 nice 3500 to 4500 drops with it, you've got enough miles on it to do that now
That will help it alot.
That will help it alot.
09-15-2004, 11:59 AM
#40
12 Second Club
iTrader: (2)
Join Date: Feb 2004
Location: Front Royal, VA
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
These are the same heads that Terry talks about in this thread:
https://ls1tech.com/forums/generation-iii-internal-engine/208941-new-brand-heads.html
https://ls1tech.com/forums/generation-iii-internal-engine/208941-new-brand-heads.html