2000 and up cobras?
2000 and up cobras? I dont know any thing about this ford car and was just wondering what kind of rwhp these guys dyno stock?
fu@#$* 302 with forged internals and blown
? gimmie a LSx any day.
fu@#$* 302 with forged internals and blown
? gimmie a LSx any day.
Originally Posted by Hennytime
the 03/04's will make like 332-330 due to their f/i, the older ones will amke like same as a lt1
Brandon
TECH Enthusiast
Joined: Sep 2004
Posts: 564
Likes: 0
From: Omaha, NE
Yea but the 03s and 04s, with a quick SC pulley change, is deep into the 400 RWHP range. I do not remember the stock RWHP dyno #s but Ford, after having had their hands slapped for exagerated advertised HP ratings, seems to be conservative with today's SAE Net FWHP #s.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Enthusiast
Joined: Jun 2003
Posts: 720
Likes: 0
From: So Cal
Originally Posted by THRLSKR
Stock anywhere from 360-380....add a CAI and Cat-back and your looking at 420-430 with a little more TQ.
To get 420-430 they would def need a pulley change with the rest of the minor bolt-on's, I cant see that happening with just a cat back and a intake.
However, after the bolt-on's those numbers change real quick. I hate those damn things.
My 03 Cobra with a kenne bell cold air intake, accufab throttle body, 2.93 lightning pulley, catback exaust and tuned did 436 rwhp and 457 torq. Dont now what stock was though. I do still have the dyno sheet also. It also ran best of a 11.87 at 120 mph with a 2.2 60 foot at Fontana with stock tires. I did run it stock and the best I could get was a 12.7 at 111 mph. Car is gone now. Motor couldn't hold it and went at 20,000 miles. I had one of the bad one's I guess.
i thought they were rated at the flywheel at 390 hp from the factory? they must have really under rated them then, then the GT500 that just came out that will be for '07 must be under rated too, 450hp but probly like 475...5.4L s/c
2000 Cobra R if I am not mistaken was High into the 300's, 2001 Cobra (g/f's brother got one) dyno'd 297rwhp/284rwtq i believe (Ford rated them 320hp/317tq) and 03-04 Cobra's ran between 360-380 on an average in both hp and tq.
supposed to be comin back in 07 w/ a SC 5.4L making 450hp or more so says a Mustang guru friend of mine. I know a guy w/ an 03 cobra w/ all those little mods and pulley swap and he put down 427rwhp and 442rwtq. Took me for a ride and i was throughly impressed( grinned the whole 12.0 seconds, he was on nitto DRs) esp. with that blower whine.
Administrator
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
Originally Posted by Hennytime
the 03/04's will make like 332-330 due to their f/i, the older ones will amke like same as a lt1
360rwhp - 390rwhp is the bone stock '03 Cobra range. Mine was in the 380's.