346 CID w/ AFR 205's goes 557HP/485TQ !!
#22
LS1 Tech Administrator
iTrader: (14)
Bringing this thread back from the dead since we have some recent engine dyno comparisons. Glad to see the competition is hot these days on the LSX front!
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#23
FormerVendor
iTrader: (13)
Originally Posted by Patrick G
Bringing this thread back from the dead since we have some recent engine dyno comparisons. Glad to see the competition is hot these days on the LSX front!
#25
Originally Posted by Brian Tooley
It is only a comparison if it is off the same dyno, Westech's dyno is about 20 high compared to some others
Westechs dyno is spot on....it used to be about 2% high a few years ago due to an inaccurate weather station, but that has long been reseolved. My 346 rolled 475+ on six different dyno's in two different states and only losing 75 from crankshaft to rear wheel power is pretty good even for a manual trans car (with power robbing 3.90's in the rear as well). Also, the math dictates that it would take every bit of 550 HP to propel a 3450 lb. vehicle to 124 MPH at 1500 above sea level.
The car ran the MPH to back both the rear wheel and observed flywheel numbers and my current 383 (which made 60 more flywheel HP and 60 more RWHP) did just the same by running the number at the track eclipsing my 346 by about 5 MPH.
Tony M.
#26
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTPMatt
AFR CNC 225cs, finish hand ported/polished to LSX 90mm intake in house. Running through a power robbing 9", 35 spline axles, spool. With our Equalizer V 3.1 Camshaft, Kooks 1 3/4 to 1 7/8" LTs through 3 x 2 1/2" x-pipe system dynomax mufflers.
Stock bottom end 346ci dyno record. (The low #s were the previous heads/cam package on the car)
We have numerous 205cc headed cars running in the 480-491 range.
Stock bottom end 346ci dyno record. (The low #s were the previous heads/cam package on the car)
We have numerous 205cc headed cars running in the 480-491 range.
Last time I checked 507.9 is higher then 505. I could be wrong but I think it is.
507.9 with LS6 heads through a 12-bolt HD Pasi with 4.56 gears
505 with AFR heads through 9" Spool 4.11's
HM.... I honestly don't think you have the world record do you?
I'll let it slide since this was posted over a year ago
#27
Originally Posted by WS6TransAm01
Um... Matt... Im prity sure we went over this before... But I guess we can do it agian...
Last time I checked 507.9 is higher then 505. I could be wrong but I think it is.
507.9 with LS6 heads through a 12-bolt HD Pasi with 4.56 gears
505 with AFR heads through 9" Spool 4.11's
HM.... I honestly don't think you have the world record do you?
I'll let it slide since this was posted over a year ago
Last time I checked 507.9 is higher then 505. I could be wrong but I think it is.
507.9 with LS6 heads through a 12-bolt HD Pasi with 4.56 gears
505 with AFR heads through 9" Spool 4.11's
HM.... I honestly don't think you have the world record do you?
I'll let it slide since this was posted over a year ago
#29
10 Second Club
iTrader: (27)
Join Date: Nov 2004
Location: Central NJ
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sleepinz28
Damn dyno racers
Most fo the 500 rwhp cars havent ran anything worth writing home to mom about yet either. Weve had 465 rwhp h/c 6 speed cars run in the 10.4s 10.5s around here
Most fo the 500 rwhp cars havent ran anything worth writing home to mom about yet either. Weve had 465 rwhp h/c 6 speed cars run in the 10.4s 10.5s around here
#30
TECH Resident
iTrader: (12)
Originally Posted by sickss228
I dont think he is "dyno racing". And his times in sig weren't with the 500+ RWHP he has now, I want to say he was making upper 470's but not positive I'm sure he'll chime in. Where do you live that those cars are deep into the 10's w/ NA stock bottom ends? I bet they are gutted to ****, hell give me a car that weighs 3000lbs w/ 470 RWHP and a good suspension and I'll click 10.30's-10.40's off all day
#32
10 Second Club
iTrader: (27)
Join Date: Nov 2004
Location: Central NJ
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1nastyss
Hey man, do u drive a SOM SS, i live in J-ville too, i have the white SS with the black hood stripe in the scoop, i think i talked to u at the track a couple of times.....I hang out with the F-body guys out at Jersey Mikes
#33
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sleepinz28
Damn dyno racers
Most fo the 500 rwhp cars havent ran anything worth writing home to mom about yet either. Weve had 465 rwhp h/c 6 speed cars run in the 10.4s 10.5s around here
Most fo the 500 rwhp cars havent ran anything worth writing home to mom about yet either. Weve had 465 rwhp h/c 6 speed cars run in the 10.4s 10.5s around here
Ur right I have not run anything worth ****.
I guess running 10.56 @ 129 with 477 HP and 3350-LBS in a street driven WS.6 isnt worth ****.
I cant wait to hit the track with 507HP...
#34
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Louis
Weak tony!! Remember in the fall of 04, we made 530/ 485 at the wheels with the stock 205s, FAST, and a G5xX cam? We backed up those numbers with the 10.40s at 140, broke 4 difs in 6 passes
#35
TECH Junkie
iTrader: (10)
Originally Posted by WS6TransAm01
Ur right I have not run anything worth ****.
I guess running 10.56 @ 129 with 477 HP and 3350-LBS in a street driven WS.6 isnt worth ****.
I cant wait to hit the track with 507HP...
I guess running 10.56 @ 129 with 477 HP and 3350-LBS in a street driven WS.6 isnt worth ****.
I cant wait to hit the track with 507HP...