Dynoing Tomorrow (TEA/FAST/KOOKS)

Reply Subscribe

Thread Tools

Search this Thread

Aug 10, 2005 | 09:24 PM

BoneSS

Thread Starter

TECH Fanatic

iTrader: (9)

Joined: Nov 2003

Posts: 1,371

Likes: 0

From: Ashland, KY

Dynoing Tomorrow (TEA/FAST/KOOKS)

TEA Stage 1.5 5.3 Heads Milled 0.010
Comp Cams XER 228/230/571/573 LSA 112
85mm Lid
Fast 90mm Intake
Nick Williams 90mm TB
0.045 Cometics Head Gaskets
Kooks 1 3/4 Stainless Steel Race Headers
Kooks Y Pipe
ASP Under Drive Crank Pulley
SLP Dual/Dual Catback Exhaust
Flowtech Cutout with McCord Power Plate
K&N Air Filter
Fast Toys Ram Air

4200/2.35 STR Stall
Motive 373's

Any Guesses?

Aug 10, 2005 | 09:33 PM

Patrick G

LS1 Tech Administrator

iTrader: (14)

Joined: Nov 2001

Posts: 8,246

Likes: 34

From: Victoria, TX

425 locked up. If you were a 6 speed more like 450.

__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Aug 10, 2005 | 10:01 PM

JaSSon

10 Second Club

iTrader: (11)

Joined: Feb 2003

Posts: 1,437

Likes: 0

From: Bridge City, TX

Post up when the results are in. Im wanting a 90/90 on mine but wonder what gains ill get with my mods.

Aug 11, 2005 | 12:21 AM

Black02SS

TECH Junkie

iTrader: (36)

Joined: Oct 2002

Posts: 3,291

Likes: 1

From: Kokomo, IN

Quote:

Originally Posted by BoneSS

Any Guesses?

Fast.

Aug 11, 2005 | 02:09 AM

silverbeast

TECH Fanatic

iTrader: (16)

Joined: Oct 2003

Posts: 1,456

Likes: 0

From: Ruffin,N.C.

my numbers are in my sig, i was hoping for 450 but fell a little short. i think it would have made it if the cam was on a 112 instead of a 112 + 4 and if someone would work with the tune. the dude only pulled it 5 times on the dyno and called it done. i wish i had the kooks headers also but i will wait until i get it to the track to make my final judgement. if the car hauls *** at the track i dont give a **** what the dyno says. good luck