Results 04 GTO + Vortech + Jeff Creech tune
08-21-2005, 02:19 PM
#1
On The Tree
Thread Starter
Join Date: Oct 2004
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Results 04 GTO + Vortech + Jeff Creech tune Jeff from Carolina Auto Masters made one of his three day trips out to California and I was able to get my GTO tuned. It has Vortech kit, JBA headers, Random Tech Mids and a Bassani exhaust. Before headers,mids and tune.... BUT first dyno I had 95-96 octane in tank and it was in the low 70's air temp. Tune session was done on 91 octane and temps in the 90's. All done on same dyno
424/408
after headers, mids and tune.... (oh yeah and a KB Boost - A - Pump)
480/450
424/408
after headers, mids and tune.... (oh yeah and a KB Boost - A - Pump)
480/450
08-21-2005, 02:50 PM
#3
TECH Enthusiast
iTrader: (18)
Join Date: Nov 2004
Location: Salado, TX
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by '02 WS6
Damn! Those numbers look good.
I remember when I saw your first dyno on that setup, badass!
Do you know when Jeff Creech will be out again?
I remember when I saw your first dyno on that setup, badass!
Do you know when Jeff Creech will be out again?
08-21-2005, 04:34 PM
#4
On The Tree
Thread Starter
Join Date: Oct 2004
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by '02 WS6
Damn! Those numbers look good.
I remember when I saw your first dyno on that setup, badass!
Do you know when Jeff Creech will be out again?
I remember when I saw your first dyno on that setup, badass!
Do you know when Jeff Creech will be out again?
Car is going back to Vortech for a little more development..... then....
full suspension (coilovers,shocks, springs, bushings and Hotchkis sway bars) AND then Cam and Alky setup... then tune of course so I can get into the 500's.
Trending Topics
08-25-2005, 03:03 AM
#8
Jason at MTI tuned my Vortech setup who is Jeff Creech? Is he like some world famous tunner or something? Good numbers on that car what blower is that kit installed with? I did 575rwhp with the G-trim and stock bottom end running out of fuel. I made less with the forged bottom end LOL! But it runs very well. I am sure you should have some good track times with that setup.
08-25-2005, 08:08 AM
#9
10 Second Club
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Jeff Creech runs Carolina Auto Masters
I don't know about world famous, but he can tune the **** out of LT1/LS1s, and he's pretty popular for being able to do so.
I don't know about world famous, but he can tune the **** out of LT1/LS1s, and he's pretty popular for being able to do so.
Last edited by Brains; 08-28-2005 at 11:34 AM.
08-27-2005, 11:32 AM
#10
On The Tree
Thread Starter
Join Date: Oct 2004
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Inspector12
Jason at MTI tuned my Vortech setup who is Jeff Creech? Is he like some world famous tunner or something? Good numbers on that car what blower is that kit installed with? I did 575rwhp with the G-trim and stock bottom end running out of fuel. I made less with the forged bottom end LOL! But it runs very well. I am sure you should have some good track times with that setup.
The pulley system is a one off at this point from Vortech, car is now back at Vortech for a little more tweaking. This car is being used for kit development by Vortech.
With the 42lb injectors they are maxed. Will be moving up to 55's shortly.
However I am very happy with 480 to the wheels with 91 octane on a 95 degree day.
Boy you sure pulled some great numbers with that G-Trim!!!
08-29-2005, 08:18 AM
#15
Boy you sure pulled some great numbers with that G-Trim
