I am looking to get 400rwhp+ through an a4 n/a. What do you all suggest? Would a cam only do this? If so, which one? Also, which supporting mods would you recommend and from whom?

 

texas speed magic stick and the bottle will put u over 400 rwhp with a good tuen

 

i was hoping to do it n/a

 

f14/f15 ms3v3/magic stick trex...

 

https://ls1tech.com/forums/dynamometer-results-comparisons/373734-my-tsp-magic-stick-dyno-results.html

I'm an M6 car and I'm hoping for 400whp.. It's going to take full bolt ons + the Magic Stick for me though.

 

oh ok so i need full boltons plus a cam? Which is the absolute best cam to go with?

 

if u want 400 rwhp get the ms3 from texas spped look at the post in the dyno section on that cam

 

i got 399.46 rwhp with a 12bolt and 4.10 gears with a 230/236 cam... all bolt ons except electric water pump.

 

A 150 shot would do it w/o the cam.

 

i agree exstanger - I am trying to get like 550-600 rwhp w/spray though

 

do those boltons and ms3 cam and spray a 150 shot and there u go man

 

woohoo How well does the cam do with spray? Any other upgrades needed like pushrods, springs etc?

 

The cam loves the spray. You'll need new springs and hardened pushrods. Check out my signature.

 

What heads would go well with this cam and what kind of numbers could be seen?

 

G5x3

 

full bolt-ons (including asp pulley, no cats) and the magic stick, good tune
did they test that magic stick cam on any other autos to see if they got 400+whp too?

 

This is a good question I was wondering this also. I ordered the magic stick monday i should be dynoing in the next wek or two. Oh I spray on top of that too only 100 though.

 

Mike, let me know when you get it and install it.. I would like to help out again... Cool?

 

Why not just get the new cheapest version of TEA heads they are only a grand using the stock valves and flow 300cfm. Slap those puppies on along with a mild cam and get better gas mileage and make over 400 no problem. Worth the extra 1000 on the heads much better torque curve with better driving manners with the smaller cam and way more power everywhere what else could you ask for?

 

Hey jody I'm doing it tommorrow. If your interested I have air tools now......