New TSP Magic Stick Dyno Numbers
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2002
Posts: 533
Likes: 0
From: Hoover, Alabama
New TSP Magic Stick Dyno Numbers I got Scott (Gomer) to install a TSP Magic Stick v3, PRC platinum springs, Manley hardened pushrods, Rollmaster timing set, TSP ported LS6 oil pump, Powerbond 25% pulley, and then he dyno tuned it with HP Tuners. I gained around 62 rwhp through a 9" over my stock cam and 10 bolt numbers! 
The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:
Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
Last edited by CRL 01 SS; Sep 24, 2005 at 05:19 PM.
TECH Addict
Joined: Jul 2002
Posts: 2,906
Likes: 0
From: Somewhere I Belong
Originally Posted by CRL 01 SS
I got Scott (Gomer) to install a TSP Magic Stick v3, PRC platinum springs, Manley hardened pushrods, Rollmaster timing set, TSP ported LS6 oil pump, Powerbond 25% pulley, and then he dyno tuned it with HP Tuners. I gained around 62 rwhp through a 9" over my stock cam and 10 bolt numbers! The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:
Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
keep us updated bro & way to go
peace
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2002
Posts: 533
Likes: 0
From: Hoover, Alabama
Originally Posted by 00firebird
really nice numbers but wheres the TQ gains?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2002
Posts: 533
Likes: 0
From: Hoover, Alabama
Originally Posted by Wicked_Hugger99
congrats dude!!!!!
BTW, where is hoover,AL???
BTW, where is hoover,AL???
Teching In
Joined: Dec 2004
Posts: 18
Likes: 0
From: RED BAY, AL
Congrats Congrats man. Nice numbers on a 9". I think gomer is going to install something like that in mine in the next week or two. Can't wait to get mine in. Gomer is really cool and does awesome work. congrats again.
Originally Posted by CRL 01 SS
I got Scott (Gomer) to install a TSP Magic Stick v3, PRC platinum springs, Manley hardened pushrods, Rollmaster timing set, TSP ported LS6 oil pump, Powerbond 25% pulley, and then he dyno tuned it with HP Tuners. I gained around 62 rwhp through a 9" over my stock cam and 10 bolt numbers! The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:
Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
The numbers are also with an LS6 intake and stock heads. The rest of my mods are in my sig. Here are my numbers:Stock cam and 10 bolt w/ 3.42s - 339 rwhp / 361 rwtq
Magic Stick v3 and 9" w/ 4.11s - 401 rwhp / 364 rwtq
I'd like to thank Scott for all of his help, and for busting his *** this week to get my cam installed and some other little problems worked out with my car.
Should have some nitrous numbers with the Magic Stick in the next month or so after I upgrade the fuel pump, injectors, and solenoids. I will try to get the dyno charts on here either today or tomorrow.
Great results guys!!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Looks like gomer is going to stay busy, I'm ordering a load of stuff tommorrow.
Originally Posted by 01hawk
Congrats man. Nice numbers on a 9". I think gomer is going to install something like that in mine in the next week or two. Can't wait to get mine in. Gomer is really cool and does awesome work. congrats again.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
