Got the car on the dyno.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Unfortunately no, because of my current work habits. I am planning to drop a 224/224 .581 .581 114 LSA "Comp Cam", in pretty soon and when time permits I will go to the track.
Dude, if you're doing the cam ... have you considered doing the AFR grind along with their matched heads? My new engine is built and going back in this week. I'll post the new dyno numbers (if you're interested) when I get back from Nashville in two weeks. They're gonna' dyno it with the converter locked AND unlocked.
My old numbers were 360/375 (with the torque spike) with TR (comp) 220/220 cam ... realisitcally about 360/365. I have a Yank SS3600 stall 3.73's.
Congrat's on the numbers ... those are really good for the mod's in your sig. Hope you get great numbers with that cam ... I think you will be very happy ... with stock OR aftermarket heads.
My old numbers were 360/375 (with the torque spike) with TR (comp) 220/220 cam ... realisitcally about 360/365. I have a Yank SS3600 stall 3.73's.
Congrat's on the numbers ... those are really good for the mod's in your sig. Hope you get great numbers with that cam ... I think you will be very happy ... with stock OR aftermarket heads.
Originally Posted by JEB99TA
Dude, if you're doing the cam ... have you considered doing the AFR grind along with their matched heads? My new engine is built and going back in this week. I'll post the new dyno numbers (if you're interested) when I get back from Nashville in two weeks. They're gonna' dyno it with the converter locked AND unlocked.
My old numbers were 360/375 (with the torque spike) with TR (comp) 220/220 cam ... realisitcally about 360/365. I have a Yank SS3600 stall 3.73's.
Congrat's on the numbers ... those are really good for the mod's in your sig. Hope you get great numbers with that cam ... I think you will be very happy ... with stock OR aftermarket heads.
My old numbers were 360/375 (with the torque spike) with TR (comp) 220/220 cam ... realisitcally about 360/365. I have a Yank SS3600 stall 3.73's.
Congrat's on the numbers ... those are really good for the mod's in your sig. Hope you get great numbers with that cam ... I think you will be very happy ... with stock OR aftermarket heads.
Originally Posted by MetallicBluews6
Unfortunately no, because of my current work habits. I am planning to drop a 224/224 .581 .581 114 LSA "Comp Cam", in pretty soon and when time permits I will go to the track.
Will keep ya' posted on the numbers ... like 00vette just said, ' cams really wake these cars up' ... especially with tuning. My Comp TR220/220 .553/.553 112 LSA threw my torque curve so low that I simply can't get traction in 1st (A4). That's why I went with the (comp) AFR Grind 224/228 .581/.588 114 LSA +1 ... to move the torque curve higher and gain a little more up top ... mostyly good power balanced through the entire powerband. Stock heads I think would compliment this cam, as well ... or vice versa.