LS2 vs Fast 90 dyno comparison
#61
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Tony Mamo @ AFR
Note the gains on this gragh below with no other changes except for one of my ported 90 units (same day on the same dyno)
#62
11 Second Club
Join Date: Aug 2005
Location: Houston, TX
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokemup
Isn't this Patrick G's dyno sheet? I thought he also changed from a 75mm MAF to an 85mm MAF for that dyno test.
Tony,
Is this true that a TB was also changed? What were the mods on the car?
#63
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokemup
Isn't this Patrick G's dyno sheet? I thought he also changed from a 75mm MAF to an 85mm MAF for that dyno test.
You are correct and I apologize that I hadn't mentioned that....to be honest its been so long I completely forgot. That gragh came to mind purely because it was a perfect example of how a properly modified FAST can not only bring big peak gains to the table but also enhance the bottom of the curve where a stock unmodified FAST really falls short.
Also, to be fair, at the low 400 RWHP level, I would be surprised if the larger MAF was even worth 3 HP and the gains would purely be at the top of the curve. Even at close to 500 RWHP the larger MAF might only be worth 3-5 HP but if your going to the dyno anyway, for the dollars invested a larger MAF still certainly makes a lot of sense. Ive also seen threads where the gains from a larger MAF have almost been negligable (perhaps tune related).
Either way though I should have provided that info with the dyno gragh....
Tony M.
#65
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by j4nash
what is the hp tq difference between the 78mm ls6 intake and the 78mm FAST intake?
Tony M.
#67
Staging Lane
iTrader: (3)
Join Date: Dec 2005
Location: Chicago/Champaign
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
for comparisons between:
Ported FAST 90/90
Ported LS2
will the particular set-up have a big effect on the gains? for some set-ups would one intake be better suited? or would the difference in set-ups jus be negligible?
Ported FAST Price = 3/2 Ported LS2 Price
it seems like many people r not disputing the FAST having better gains than the LS2, but they r wondering if the gains justify the overwhelming increase in price.
i feel like maybe on an aggressive set-up 500+whp the Ported FAST is well worth the xtra price, but maybe for the concervative setups 400whp the Ported LS2 would be dramitically better than the LS6 and almost as good as the Ported FAST. so for the price the Ported LS2 is a better option for those individuals.
Ported FAST 90/90
Ported LS2
will the particular set-up have a big effect on the gains? for some set-ups would one intake be better suited? or would the difference in set-ups jus be negligible?
Ported FAST Price = 3/2 Ported LS2 Price
it seems like many people r not disputing the FAST having better gains than the LS2, but they r wondering if the gains justify the overwhelming increase in price.
i feel like maybe on an aggressive set-up 500+whp the Ported FAST is well worth the xtra price, but maybe for the concervative setups 400whp the Ported LS2 would be dramitically better than the LS6 and almost as good as the Ported FAST. so for the price the Ported LS2 is a better option for those individuals.
#70
TECH Apprentice
iTrader: (2)
Join Date: Aug 2003
Location: Kansas
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Tony Mamo @ AFR
Slight loss of low RPM power (below 3500)....about an 8-12 gain upstairs starting from around 5500 all the way to redline (obviously tune and combination dependent). Add 3-5 HP for an unported 90 mm version (and larger TB obviously)....identical curve at the lower RPM's.
Tony M.
Tony M.
#72
TECH Apprentice
Join Date: Sep 2005
Location: DFW, TX
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanks to this thread, i contacted dave and picked up his DTP stage 2 cam and his ported fast 90, for way less than i thought it would be. dave my car should be done this friday, once it is ill send you the dyno results. i decided to get the LS2 tb ported by mark shanner from www.s2performance.net he lives 10 minutes from me, figured id give the ported fast its full potential.
the only down side is i ran out of money and im going to be reusing the stock exhaust system w/corsa cat back.
the only down side is i ran out of money and im going to be reusing the stock exhaust system w/corsa cat back.
#73
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by j4nash
anyone have some dyno numbers for, ls6 vs. 78mm FAST?
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#74
TECH Apprentice
Join Date: Sep 2005
Location: DFW, TX
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by j4nash
anyone have some dyno numbers for, ls6 vs. 78mm FAST?
#75
Staging Lane
iTrader: (3)
Join Date: Dec 2005
Location: Chicago/Champaign
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
someone asked a question in the external section and it got me thinkin about this thread again. so i searched for it, found it, and now am bumping it after 2 months...
has anyone had a chance to do a true comparison test of ported LS2 vs ported FAST 90? same day, car, etc? i know Tony Mamo was talking about posting if he had a chance, but i havent seen it if he has.
i see LS2 intakes still going for less than LS6's and prices seem to be continuously dropping. this makes me think they are garbage and i should stop looking at them. but i still wonder how it compares to FAST (and y not an LS6 too) on a cam only or mild H/C car (something jus over 400whp)???
has anyone had a chance to do a true comparison test of ported LS2 vs ported FAST 90? same day, car, etc? i know Tony Mamo was talking about posting if he had a chance, but i havent seen it if he has.
i see LS2 intakes still going for less than LS6's and prices seem to be continuously dropping. this makes me think they are garbage and i should stop looking at them. but i still wonder how it compares to FAST (and y not an LS6 too) on a cam only or mild H/C car (something jus over 400whp)???
#76
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by OJmobileII
someone asked a question in the external section and it got me thinkin about this thread again. so i searched for it, found it, and now am bumping it after 2 months...
has anyone had a chance to do a true comparison test of ported LS2 vs ported FAST 90? same day, car, etc? i know Tony Mamo was talking about posting if he had a chance, but i havent seen it if he has.
i see LS2 intakes still going for less than LS6's and prices seem to be continuously dropping. this makes me think they are garbage and i should stop looking at them. but i still wonder how it compares to FAST (and y not an LS6 too) on a cam only or mild H/C car (something jus over 400whp)???
has anyone had a chance to do a true comparison test of ported LS2 vs ported FAST 90? same day, car, etc? i know Tony Mamo was talking about posting if he had a chance, but i havent seen it if he has.
i see LS2 intakes still going for less than LS6's and prices seem to be continuously dropping. this makes me think they are garbage and i should stop looking at them. but i still wonder how it compares to FAST (and y not an LS6 too) on a cam only or mild H/C car (something jus over 400whp)???
Tony M.
#77
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Tony Mamo @ AFR
I'm hitting the engine dyno in early January with a 403 I expect to make about 600 or so with one of my ported FAST pieces....if someone wants to loan me a ported LS2 I would be more than happy to swap it right on the dyno. I am going to swap a stock LS2 intake if I can get my hands on one....at least that was the plan and I think there is a good chance of that happening.
Tony M.
Tony M.
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Good luck Tony .
peace
#78
Staging Lane
iTrader: (3)
Join Date: Dec 2005
Location: Chicago/Champaign
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by bad95killer
Hopefully someone give ya a hand in this then make a damn fair comparison but i still have a feeling that the ported FAST intake gonna slightly edged out the Ported LS2
Good luck Tony .
peace
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Good luck Tony .
peace
#80
Staging Lane
iTrader: (3)
Join Date: Dec 2005
Location: Chicago/Champaign
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Justin00SS
Now I'm interested in this. lol
Where can I get an LS2 intake? haha
Does the LS2 intake use the stock LS1/6 fuel rails?
Where can I get an LS2 intake? haha
Does the LS2 intake use the stock LS1/6 fuel rails?