Is this lt1 really dynoing at 411 rwhp?
#45
On The Tree
Join Date: Jan 2003
Location: Lafayette , Indiana
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Here is a post on my LT1 from the summer.
I went to the dyno today .. The car has an untouched from the factory stock bottom end.. I have Lingenfelter ported heads and Joe Overton did a custom grind cam. Eric Bradley ported the intake, throttle body. This setup has been in my car for almost 4years . I converted the car from an auto to a 6-speed and added a strange 12 bolt... The car dynoed N/A 416.4rwhp and 398.7rwtq after it was tuned a little.. Then i made one run with the spray and made 608.9rwhp and 657.4rwtq.. I am very happy with this setup .. This is a full weight convertible with a/c and everything that came on it from the factory.
The tune was on the mild side because the bottom end is stock 12.8 a/f. n/a. I sprayed 175 shot.
Chris
I went to the dyno today .. The car has an untouched from the factory stock bottom end.. I have Lingenfelter ported heads and Joe Overton did a custom grind cam. Eric Bradley ported the intake, throttle body. This setup has been in my car for almost 4years . I converted the car from an auto to a 6-speed and added a strange 12 bolt... The car dynoed N/A 416.4rwhp and 398.7rwtq after it was tuned a little.. Then i made one run with the spray and made 608.9rwhp and 657.4rwtq.. I am very happy with this setup .. This is a full weight convertible with a/c and everything that came on it from the factory.
The tune was on the mild side because the bottom end is stock 12.8 a/f. n/a. I sprayed 175 shot.
Chris
Last edited by LPE Z Convt; 12-21-2007 at 03:42 PM.