PRC Street $849 Heads DYNO RESULTS
#24
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Actually we've sold as many with the standard spring as heads with double springs. Some guys already have spring kits
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Originally Posted by black_z
Nice #'s. The price is kinda misleading though because most guys would definitely upgrade springs.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#25
LSxGuy widda 9sec Mustang
iTrader: (12)
Join Date: Nov 2001
Location: Texas and Qatar
Posts: 3,043
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BlueSix
Any chance on getting a dyno of these heads with a smaller (224ish) cam?
Send me the cam and I'll test it in my car.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
I currently don't know anyone local with a 224ish cam that is planning on heads though.
I'll post another graph if I swap cams to the MS3 and when (if ever) I install an underdrive pulley.
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#29
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL Guys!!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#34
LSxGuy widda 9sec Mustang
iTrader: (12)
Join Date: Nov 2001
Location: Texas and Qatar
Posts: 3,043
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I lost a very slight amount although not enough to worry about. I would have had to flycut the pistons on the intake side if I had 2.04" valves, as the 235/240 camshaft gets close on the intake. 2.02" should be fine if I go under the knife again for an "update".
Since there is only 30 of my cam in existance, its probably not a issue unless its bigger than a MS3.
Since there is only 30 of my cam in existance, its probably not a issue unless its bigger than a MS3.
#35
12 Second Club
iTrader: (6)
Join Date: Nov 2002
Location: Austin, TX by way of Chicago, IL
Posts: 2,620
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Joseph, any speculation how my car would dyno NA with those TSP/PRC heads and my mods in sig? I'm basically running a full bolton 233/239 @ 113 car. M6.
By the way, my cam scares people. I know I made the right choice going with TSP.
By the way, my cam scares people. I know I made the right choice going with TSP.
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)